Home
  Γνήσια αξεσουάρ & ανταλλακτικά κινητής τηλεφωνίας!

Product categories

Computer, Notebook, PC, PDA Apple (Parts + Accesories) Batteries Bluetooth devices, GPS, Drones Cables Universal Handsfree headset Hardware Service Tools Air Compresser
Antistatic products
CONSUMABLES
Desoldering Station
Glass Rework Remover Station
Hot air rework stations
Infrared BGA SMD rework station
Lamp, Oven UV (UV, UV-c) Sterilizer
Microscope, Magnifier Lamp
Oscilloscope/Spectrum Analyzer
Oven
Power Supply DC
Service manual books
Signal Generator RF Frequency
Software Tools
Soldering station
Tempered Glass Machine
Tester Volt Curent
Tools Hardware
Touch Bubble Remove Machine
Lot products no category Memory Cards, Flash Stick Mobile phone Cases Mobile phone charger Mobile Phones, Sim card, Dummy Security System Spare repair Parts Mobile Phones, Smartphone, SmartWatch Tablet Telecomunication ULTRASONIC Cleaner, Liquid Home devices


-

-
Special offers!
Delivery with BOXNOW contact with us 2109566401 (until 60X45X08CM) SMALL

Delivery with BOXNOW contact with us 2109566401 (until 60X45X17CM) SMALL

DELIVERY-BOXNOW (SIZE: 60X45X8CM) SMALL
1,61€+VAT
-2,00€
Delivery with BOXNOW contact with us 2109566401 (until 60X45X36CM) BIG

Delivery with BOXNOW contact with us 2109566401 (until 60X45X36CM) BIG DIMENSION

DELIVERY-BOXNOW (SIZE: 60X45X36CM) BIG
6,45€+VAT
-8,00€
Delivery with BOXNOW Contact with us for more information (UNTIL 60X45X17CM) MEDIUM

Delivery with BOXNOW Contact with us for more information (UNTIL 60X45X17CM) MEDIUM

DELIVERY-BOXNOW (SIZE: 60X45X17CM) MEDIUM
3,23€+VAT
-4,01€
You are here: Home » Hardware Service Tools » Infrared BGA SMD rework station

Infrared BGA SMD rework station

Search filters (Infrared BGA SMD rework station)

Manufacturer:
Description:
31 results where found.Go to page:1 | 2
Code Image Description Unit price
PDS-BGA STENCIL GPU 0.60 mm
[cod0013734]
Reballing BGA Stencil Template for XBOX360 GPU 0.60 mm

Reballing BGA Stencil Template for XBOX360 GPU 0.60 mm

Reballing BGA Stencil Template for XBOX360 GPU 0.60 mm.
Features:
- sure fixing of the chip for the reballing
- Delivery with stencils
- sure and clean reballing with a low cost expenditure.
Delivery 5-10 days
Out of stock Minimum order quantity  
16,05€+VAT
-19,90€
PDS-IFRARED BGA 9000A WELDING STATION IR
[3200117]
Infrared Station (IR) AOYUE IntBGA9000A Soldering System BGA-Elements (ONLY ON REQUEST DELIVERY)

Infrared Station (IR) AOYUE IntBGA9000A Soldering System BGA-Elements (ONLY ON REQUEST DELIVERY)

Micro BGA component assemblies in mobile phones, computers, telephones etc. - The antistatic design prevents PCBs and the placement of components from being damaged due to static charging.
- Elaborate infrared (IR) soldering "GUN" for focused heating of the components
- Large, built-in PCB preheater with mid-wavelength infrared (IR)
- Massive PCB workpiece holder
- Digital display for simple settings
- Ergonomic shape allows an easy and comfortable working
- It is delivered with handheld soldering iron (lead-free)
- A micro processor controls time, temperature and airflow for maximum performance
- The placement of the components is dipayed via screen This station is microprocessor controlled. The Aoyue 9000A is an ingenuous and sophisticated rework system. Micro BGA assemblies from mobile phones, computers, telephones and game consoles can be processed safely and effectively by using this performant station. Handling and operation are simple to come to grips with. This station enables the user high-performance rework applications on modern systems like: BGAs, BGAs SMDs, SMT connectors without overheating these components. The station uses heat wave technology (IR) instead of the conventional hot air. the palcement of the components is achieved without using protective shield or other tools because no air flow is used for soldering. By non-contact measurement the soldering and desoldering temperature is determined (at the IR-light source and the quartz preheater), simple, fast and safe. After being sucessfully soldered out BGAs can be soldered again in place. No expensive nozzles are needed, the unit is complete and fully operational. Due to the adjustable PC-board surface preheater the user can avoid misplacing the components or their distortion. Using this rework system is as simple as placing components on an empty pc board. The built-in vacuum placer facilitates the removal of the components to be desoldered.
Delivery 1-3 days
Out of stock Minimum order quantity  
12.895,16€+VAT
-15.990,00€
PDS-INFRARED 710 IR AOYUE REWORK FOCUSED STATION
[3200084]
Infrared station AOUYE IR 710 Rework

Infrared station AOUYE IR 710 Rework

710 is a modular and flexible infrared technology for reworking advanced IC packages like BGAs, micro-BGAs, QFPs, SOICs and other mounted component.
710 is a modular and flexible infrared technology for reworking advanced IC packages like BGAs, micro-BGAs, QFPs, SOICs and other mounted component. This focused infrared soldering system generates heat through concentration of infrared head waves for effective, high yield and flawless rework. Safe and effective, easy to operate infrared technology in a simplicity of a handtool.
Delivery 7-15 days
Out of stock Minimum order quantity  
1.524,20€+VAT
-1.890,01€
PDS-INFRARED 732 HEATER ELEMENT HANDLE UNIT SET
[3200215]
Top Heater with Heating Element Aoyue 732 handle unit Spare Part

Top Heater with Heating Element Aoyue 732 handle unit Spare Part

the top heater of your quartz preheater Aoyue 732 is damaged, you will receive here an original heater which includes an IR-heating element as spare part for an easy replacement. The IR-Heating element should be replaced if it is damaged or broken. In most cases damaged heating elemens weaken rapidly the efficiency of the heat output.
Delivery 7-15 days
Out of stock Minimum order quantity  
176,61€+VAT
-219,00€
PDS-INFRARED 732 INFRARED SENSOR CABLE B+C
[cod0020747]
Temperature sensor Aoyue 732 version (B+C) jack 3 pin connector

Temperature sensor Aoyue 732 version (B+C) jack 3 pin connector

You will receive a temperature sensor B+C from Aoyue suitable for the Infrarred soldering station 732 Quartz (IR), Quartz (IR) Preheater 853A++
Delivery 7-15 days
Out of stock Minimum order quantity  
32,18€+VAT
-39,90€
PDS-INFRARED 732 IR BGA NOZZLE 19x19mm
[cod0020748]
Nozzle BGA 19x19mm for AOYUE IR Soldering Station Int732

Nozzle BGA 19x19mm for AOYUE IR Soldering Station Int732

Hot Air Nozzles BGA for AOYUE 732
Aoyue-Modell Aoyue H1919A
IC-Case BGA 18x18 mm
Nozzle-Dimension 19x19 mm
Compatible Aoyue stations Int732 Quartz (IR)
1Compatible Aoyue stations Aoyue Int732 Quartz (IR)
Delivery 7-15 days
Out of stock Minimum order quantity  
56,37€+VAT
-69,90€
PDS-INFRARED 732 IR BGA NOZZLE 28x28mm
[cod0020751]
Nozzle BGA 28x28mm for AOYUE IR Soldering Station Int732

Nozzle BGA 28x28mm for AOYUE IR Soldering Station Int732

Hot Air Nozzles BGA for AOYUE 732
Aoyue-Modell Aoyue H2828A
IC-Case BGA 27x27 mm
Nozzle-Dimension 28x28 mm
Compatible Aoyue stations Int732 Quartz (IR)
1Compatible Aoyue stations Aoyue Int732 Quartz (IR)
Delivery 7-15 days
Out of stock Minimum order quantity  
56,37€+VAT
-69,90€
PDS-INFRARED 732 IR BGA NOZZLE 41x41mm
[cod0020749]
Nozzle BGA 41x41mm for AOYUE IR Soldering Station Int732

Nozzle BGA 41x41mm for AOYUE IR Soldering Station Int732

Hot Air Nozzles BGA for AOYUE 732
Aoyue-Modell Aoyue H4141A
IC-Case BGA 40x40 mm
Nozzle-Dimension 41x41 mm
Compatible Aoyue stations Int732 Quartz (IR)
1Compatible Aoyue stations Aoyue Int732 Quartz (IR)
Delivery 7-15 days
Out of stock Minimum order quantity  
48,31€+VAT
-59,90€
PDS-INFRARED 732 IR BGA NOZZLE 45x45mm
[cod0020750]
Nozzle BGA 45x45mm for AOYUE IR Soldering Station Int732

Nozzle BGA 45x45mm for AOYUE IR Soldering Station Int732


Hot Air Nozzles BGA for AOYUE 732
Aoyue-Modell Aoyue H4545A
IC-Case BGA 44x44 mm
Nozzle-Dimension 45x45 mm
Compatible Aoyue stations Int732 Quartz (IR)
Compatible Aoyue stations Aoyue Int732 Quartz (IR)
Delivery 7-15 days
Out of stock Minimum order quantity  
48,31€+VAT
-59,90€
PDS-INFRARED 732 TEMPERATURE SENSOR CABLE A
[cod0020746]
Temperature sensor Aoyue 732 version (A) 4 pin connector

Temperature sensor Aoyue 732 version (A) 4 pin connector

Temperature sensor Aoyue 732 version (A) 4 pin connector.
Delivery 7-15 days
Out of stock Minimum order quantity  
40,24€+VAT
-49,90€
PDS-INFRARED AOYUE 720 REWORK STATION (CE/ESD)
[cod0015274]
Rework Station Focused Infrared SMD AOYUE 720 Rework Soldering Station (Overkill reflow, specialised in reballing)

Rework Station Focused Infrared SMD AOYUE 720 Rework Soldering Station (Overkill reflow, specialised in reballing)

The antistatic design of the Aoyue 720 reliably prevents PCBs and circuits from being damaged due to static charging. The ingenious Infrared (IR) soldering "Gun" is particularly suitable for the focused heatingof the components. The device has a large preheater with pc-board holder for heating uniformly the PC boards to be processed. The digital display enables an easy reading making the handling of the device easier. The IR gun is operated via foot switch, so that the hands are free to work.
Delivery 7-15 days
Out of stock Minimum order quantity  
1.612,09€+VAT
-1.998,99€
PDS-INFRARED BGA REWORK STATION AOUYE 720 (NEW)
[cod0020576]
Rework BGA station infrared welding system

Rework BGA station infrared welding system

The antistatic design of the Aoyue 720 reliably prevents PCBs and circuits from being damaged due to static charging. The ingenious Infrared (IR) soldering "Gun" is particularly suitable for the focused heatingof the components. The device has a large preheater with pc-board holder for heating uniformly the PC boards to be processed. The digital display enables an easy reading making the handling of the device easier. The IR gun is operated via foot switch, so that the hands are free to work.
Operating mode of Aoyue infrared soldering stations The heating of the elements results from the absorption der IR-radiation. Because the metal connections of the components only have a low absorption, which means they reflect the IR-radiation, the heat has to be conveyed to the soldering points mainly over the component itself, over the PC board which is also heated and via the surrounded air. For this reason one works with both radiators (Preheater from the underside and IR-light from the upper side ) to heat or preheat the whole surrounding area of the soldering point. The temperature of the single components can vary greatly. The absorption depends on the material and the wave-length and this in turn depends on the temperature of the radiator. The heating of large and thicker SMDs is slower than that of small and thin SMDs.
The infr-red soldering has the following advantaged and disadvantages. Advantages:
• Simultaneous soldering process with high efficiency
• Efficient and particularly suitable for serial products
• Easy handlind of the IR-unit, user-friendly
• Temperature of the largest SMDs (high pin count ICs) is the lowest Disadvantages:
• Temperature profile necessary.
• Temperature of the single components can vary significantly. Small SMDs, for example single semiconductors can be easily overheated.
The Aoyue 720 is an ingenious Rework System as handy as a tool. It can be used to process micro BGA components in mobile phones computers, telephones, video game consoles etc. Handling and operation are simple to come to grips with and the station runs safely and efficiently. This station enables high performant rework applications for most modern systems like: BGAs, BGAs SMDs, SMT Connectors without overheating these components. The heat is generated by means of infrared waves (IR) and not with conventional hot air. The moving and placing of the components can be achieved without protection shield or other tools becuase no air flow is used for soldering. By non-contact measurement the soldering and desoldering temperature is determined (at the IR-light source and the quartz preheater), simple, fast and safe. After being sucessfully soldered out BGAs can be soldered again in place. No expensive nozzles are needed, the unit is complete and fully operational. Due to the adjustable PC-board surface preheater the user avoids misplacing the components or their distortion. Using this rework system is as simple as placing components on an empty pc board. the built-in screen shield protects the user against IR-radiation.
- Foot switch
- Main station - includes massive stand
- PCB holder - installed on the device
- Infrared Gun
- Preheating station - fully built-in
Delivery 7-15 days
Out of stock Minimum order quantity  
1.443,54€+VAT
-1.789,99€
PDS-INFRARED BGA SYSTEM R6000 SEMI AUTOMATIC
[cod0013275]
Infrared welded system BGA ZM-R6000 Soldering and Desoldering SMD Rework Station

Infrared welded system BGA ZM-R6000 Soldering and Desoldering SMD Rework Station

Main features:
Large area of infrared carbon fiber Pre-heating system, with the advantage of pre-heating fast and evenly and no light pollution.
Temperature parameters protected by limits of authority, for avoiding error settings.
Ten segments of temperature control process, suitable for all kinds of BGA Rework.
Unlimited storage of the temperature profile, just need press one key to use the profile.
Three K-type sensors available can realize the high precise temperature testing of each point of PCB or BGA, and PC can generate report of curves analysis automatically.
Desoldering and soldering automatically, No need the manual adjustment.
Hot air flow can be adjustable to meet the demand of any chips.
USB Connection driver-free, PC control.
The bottom hot air lifting control available in the front panel, to adjust at any time. Main technical parameter
Power supply AC 220V±10 50/60 Hz
Top hot air heater power 800 W
Bottom hot air heater power 800 W
IR preheating power 2400 W
Hot air heating temp 400℃(Max)
Bottom preheating size 400mm×300mm
Max available PCB size 400mm×380mm
Available chip size 2×2mm--60×60mm
Dimensions L520×W520×H550
Communication port USB
External temperature port 3pcs
Net weight 25kg
Color Milk White
CE idendificated,ensure the product value and 1 year warranty,(offer free parts within 1 year).
Delivery 5-10 days
Out of stock Minimum order quantity  
3.943,55€+VAT
-4.890,00€
PDS-INFRARED DESOLDERING WELDING SYSTEM YX-863
[cod0017895]
Infrared DesolderinG Welding System YX-863, YX-863D

Infrared DesolderinG Welding System YX-863, YX-863D

Delivery Sortage
Out of stock Minimum order quantity  
185,40€
266,05€+VAT
-329,90€
PDS-INFRARED LAMP 720 HANDLE STATION AOYUE
[cod0015275]
Lamp for Infrared Welding Systems BGA Rework Station AOYUE 710, 720, 9000A

Lamp for Infrared Welding Systems BGA Rework Station AOYUE 710, 720, 9000A

Delivery 7-15 days
Out of stock Minimum order quantity  
152,42€+VAT
-189,00€
PDS-INFRARED STATION 732 AOYUE PREHEATER LAMP
[3200254]
Spare Part Heating Element for AOYUE 732 Quartz (IR)

Spare Part Heating Element for AOYUE 732 Quartz (IR)

The IR-Heating element should be replaced if it is damaged or broken. In most cases damaged heating elemens weaken rapidly the efficiency of heat output. Dimensions : 75 x 73 x 45 mm
Weight [kg] : 0.142
Power : 500 W
Temperature range : Infrared: 0-480°C
Compatible Aoyue stations : Aoyue 732
Heating Element : Preheater IR - Infrared 500W
Delivery 7-15 days
Out of stock Minimum order quantity  
128,95€+VAT
-159,90€
PDS-INFRARED YX862++ WELDING STATION (4 in 1 )
[cod0020587]
Soldering station YAXUN 862d + + SMD Rework BGA IRDA Infrared Box (DISCONTINUED)

Soldering station YAXUN 862d + + SMD Rework BGA IRDA Infrared Box (DISCONTINUED)

YAXUN 862d + + SMD Rework BGA IRDA Infrared Soldering Station Characteristics:
1.The infrared rays of the adoption independence development dismantles the welding technique
2. the objective set infrared heat, the penetration force is strong, the device suffers the caloric blance, breaking the traditional hot breeze
Disassemble the body of the welding machine living module heating, strong defect in bombardment in energy.
3. the operation is easy, throught make a day of it the training can immediately complete and all modules.
4. not have the need to dismantle the soldering cure to have, this machine can dismantle an all modules.
5. This machine has a pre-heating sun system perheating range 120 * 120 mm.
6. infrared rays heats the none caloric the romantic moving, can not affect the small peripheral module. applicably all module, is the module of micro BGA particularly.
7. The infrared heat, dismantles the flat-out the breeze of specific heat in soldering robs quick a double, because suffer the caloric rate of failure device to lower consumedly.
8. Whole Figures LED function display.
9.The whole function suffers the CPU control. Specification:
1. Supply Voltage: 220V AC
2. Power consumption: 1200 W (Max.)
3. pump: Brusheless Air Gun Engine
4. Pre-heating area: 120 * 120 mm (max.)
5. leakage Iron tip voltage: <0.5 mV
6. Standard iron tip: AT-900M
7. hot air temperature: 100 to 480C
8. iron tip temperature: 200 to 480C
9. Weight: about 11 Kilo with Packing Package includes:
1. Super YAXUN 862d
2. infrared ray device
3. Infrared equipment support
4. air blower HOT WAND Type B (motor)
5. holder heat gun
6. soldering iron holder
7. soldering iron
8. Soldering Iron Foam
9. Includes 3 Single Nozzles
Delivery Discontinued
Out of stock Minimum order quantity  
563,71€+VAT
-699,00€
PDS-PLATFORM 618 VERSATILE WORKING ADJUSTABLE
[cod0013271]
Versatile Working Platform Aouye 618 (dimension 250 x 350mm)

Versatile Working Platform Aouye 618 (dimension 250 x 350mm)

Large working space and wide range of fine height adjustment.
Suited for meticulous reworking when combined with models 968, 768, 899, 853 and other apparatus.

Platform Dimension:
250 x 350mm
Main Height Adjustment:
300mm
Fine Height Adjustment:
100mm
Weight:
3.1 kg
Delivery Discontinued
Out of stock Minimum order quantity  
137,02€+VAT
-169,90€
PDS-PREHEATER AOYUE 853++ BGA (W/SENSOR)
[cod0021445]
Digital Quartz (IR) Preheater Aoyue Int853A++ BGA Repair Unit

Digital Quartz (IR) Preheater Aoyue Int853A++ BGA Repair Unit

External Dual Temperature Sensor 500 Watt, 80°C - 380°C, Board Holder, User Defined Profile, Three Rework- Programs.
Delivery 7-15 days
Out of stock Minimum order quantity  
241,85€+VAT
-299,89€
PDS-PREHEATER AOYUE 883 INFRARED 1500W AOYUE
[3200239]
Quartz Preheater Infrared AOUYE 883 with 1500 Watt

Quartz Preheater Infrared AOUYE 883 with 1500 Watt

The Aoyue 883A Preheater works with a fast Quartz IR( infrared) heating element that can be continously adjusted. The pc-board holder (adjustable) suitable for different types of pc-boards is included in the delivery and ensures an easy and safe fixation of the circuit board. Due to the 3 selectable operational modes and the infrared technology the same working conditions can be maintained all the time enabling a constant good result. The large digital display facilitates a good control of the chosen operational mode due to a large number of display options. Safe working with large pc boards is possible due to a large preheater surface as well as an additional tempertaure sensor (two internal, two external sensors, that are freely positioned and can be queried individually ).You can additionally set the "heating peaks" starting with certain temperatures values in certain time intervals.
CE, ROHS, ESD SAFE
Delivery 7-15 days
Out of stock Minimum order quantity  
362,82€+VAT
-449,90€
31 results where found.Go to page:1 | 2

Quick product search

Search by brand, model, product type, code, etc
   

Add to cart My shopping cart

Loading...

Members login

Username
Password
 

Remind me my username and password...
  

Newsletter


Subscribe to our newsletter, in order to receive information and special offers for our products.

Your email:
Message type:
 

Positive SSL

Terms of use | Shipping and returns To top
2006 © PDS Electronics. All Rights Reserved. Developed by TotalWeb | 2024-03-28 13:12:19.9017429 -07:00