Home
  Γνήσια αξεσουάρ & ανταλλακτικά κινητής τηλεφωνίας!

Product categories

Computer, Notebook, PC, PDA Apple (Parts + Accesories) Batteries Bluetooth devices, GPS, Drones Cables Universal Handsfree headset Hardware Service Tools Air Compresser
Antistatic products
CONSUMABLES
Desoldering Station
Glass Rework Remover Station
Hot air rework stations
  Hor Air Parts
Infrared BGA SMD rework station
Lamp, Oven UV (UV, UV-c) Sterilizer
Microscope, Magnifier Lamp
Oscilloscope/Spectrum Analyzer
Oven
Power Supply DC
Service manual books
Signal Generator RF Frequency
Software Tools
Soldering station
Tempered Glass Machine
Tester Volt Curent
Tools Hardware
Touch Bubble Remove Machine
Lot products no category Memory Cards, Flash Stick Mobile phone Cases Mobile phone charger Mobile Phones, Sim card, Dummy Security System Spare repair Parts Mobile Phones, Smartphone, SmartWatch Tablet Telecomunication ULTRASONIC Cleaner, Liquid Home devices


-

-
Special offers!
Delivery with BOXNOW contact with us 2109566401 (until 60X45X08CM) SMALL

Delivery with BOXNOW contact with us 2109566401 (until 60X45X17CM) SMALL

DELIVERY-BOXNOW (SIZE: 60X45X8CM) SMALL
1,61€+VAT
-2,00€
Delivery with BOXNOW Contact with us for more information (UNTIL 60X45X17CM) MEDIUM

Delivery with BOXNOW Contact with us for more information (UNTIL 60X45X17CM) MEDIUM

DELIVERY-BOXNOW (SIZE: 60X45X17CM) MEDIUM
3,23€+VAT
-4,01€
Delivery with BOXNOW contact with us 2109566401 (until 60X45X36CM) BIG

Delivery with BOXNOW contact with us 2109566401 (until 60X45X36CM) BIG DIMENSION

DELIVERY-BOXNOW (SIZE: 60X45X36CM) BIG
6,45€+VAT
-8,00€
You are here: Home » Hardware Service Tools » Hot air rework stations

Hot air rework stations

Available subcategories

Hor Air Parts
Hor Air Parts

Search filters (Hot air rework stations)

Manufacturer:
Description:
32 results where found.Go to page:1 | 2
Code Image Description Unit price
PDS-768 AOYUE LEAD FREE REPAIR STATION
[3200085]
Digital smd hot air and soldering rework station 768 Lead free 70W

Digital smd hot air and soldering rework station 768 Lead free 70W

Lead free 70W soldering whith digital display for air and heater and 15 Volt power suply together and 4 nozzle.
One station does it all. A microprocessor controlled versatile equipment combining the geatures of hot air, soldering station and power source in full digital display.
Delivery Discontinued
Out of stock Minimum order quantity  
355,57€+VAT
-440,91€
PDS-8032 HANDLE HOT AIR GUN 300W
[3200090]
Hot air gun BK-8032 input 220V 300W BOX

Hot air gun BK-8032 input 220V 300W BOX

Hot air gun 8032 input 220V
Delivery 7-15 days
Out of stock Minimum order quantity  
56,37€+VAT
-69,90€
PDS-8208 SMD REWORK HOT AIR STATION
[cod0016333]
Hot Air system Aoyue 8208 SMD Rework Station

Hot Air system Aoyue 8208 SMD Rework Station

The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 8208 is easy to handle so that you have no problems when using the station! The housing is equipped with a practical holder where the hot air gun can be placed for its safe storage.
The turbine engine generates a natural soft air stream due to which the best soldering results can be achieved!
Perfectly suitable for repairing QFP, SOP, PLCC and SOJ components
With integrated temperature sensor that ensures a constant temperature independent of the air stream rate that has been set.
Auto Sleep Mode Sensor! As soon as the hot air gun is docked on the heating element is beeing cooled down and stops heating- saves energy costs!
The station changes to Stand -By mode after one minute of not being used and when resuming its operation it will newly activate the preconfigurated values.
Wide temperature and air flow adjustment range.
The cold air cools off the heating element after use continuously, increasing the lifetime of the heating element.
Delivery 7-15 days
Out of stock Minimum order quantity  
96,69€+VAT
-119,90€
PDS-850A
[3200089]
Σταθμός θερμού αέρα συγκόλλησης - αποκόλλησης

Σταθμός θερμού αέρα συγκόλλησης - αποκόλλησης

Σταθμός SMD με 4 ακροφύσια
Delivery 5-10 days
Out of stock Minimum order quantity  
124,76€+VAT
-154,70€
PDS-852 AOYUE HOT AIR STATION W/DISPLAY
[3200087]
Digital smd hot air rework station PDS  AOYUE 852

Digital smd hot air rework station PDS AOYUE 852

Digital smd hot air rework station 852 whith 4 nozzle.
Hot-Air Nozzles
1124 round Ø 2,4 mm
1130 round Ø 4,4 mm
1196 round Ø 7 mm
1197 round Ø 9 mm
Delivery 7-15 days
Out of stock Minimum order quantity  
160,48€+VAT
-199,00€
PDS-852A+ PRO HOT AIR STATION AOYUE (NEW)
[3200317]
Hot Air station AOYUE 852A+ PRO Digital SMD Rework

Hot Air station AOYUE 852A+ PRO Digital SMD Rework

Description The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 852+ is easy to handle so that you have no problems when using the station! The temperature is indicated by a digital display. The station changes to power sleep mode when the hot air gun is docked on the handle andand at the same time cools down the heating element. This leads to low energy costs and a long operating life of the heating element. The temperature and the air can be adjusted by means of a selector dial.The air flow is accurately indicated by means of an air tube with a metal ball.The black coated housing is equipped with a practical carrying handle. Even a layman can use the station in a few minutes! You will also receive four different nozzles. - CPU monitoredt!
- the digital display shows the accurate set temperature as well as the current temperature
- air flow rate is accurately indicated by the AIR FLOW METER
- perfectly suitable for repairing QFP, SOP, PLCC and SOJ components
- integrated temperature sensor ensures a constant temperature regardless of which air flow rate was set
- unique 15 minute stand-by automatic Sleep Modus. As a result energy is saved, if the station is needed again just touch the handle and the preconfigurated values will be activated again!
- Air flow meter precisely indicates the air flow all time long
- wide temperature and air flow adjustment range.
- the cold air cools off the heating element after use continuously, increasing the lifetime of the heating element.
The station is delivered with a transportation safety device (a red screw, which secures the pump during transportation), this has to be removed BEFORE using the station for the first time! ! The station is completely operational after the screw removal.You need only 5 minutes to do that and then you have a completely functional hot air station.
Delivery 5-10 days
Out of stock Minimum order quantity  
161,21€+VAT
-199,90€
PDS-852A++ AOYUE HOT AIR STATION DIGITAL PRO
[3200086]
Full Digital hot air rework station Aoyue 852A++

Full Digital hot air rework station Aoyue 852A++

Full digital automatic smd hot air rework station 852A+ whith 4 nozzle.
The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 852++ is easy to handle so that you have no problems when using the station! The temperature is indicated by a digital display. The station changes to power sleep mode when the hot air gun is docked on the handle and at the same time cools down the heating element. This leads to low energy costs and a long operating life of the heating element. The temperature and the air can be adjusted by means of a selector dial.The air flow is accurately indicated by means of an air tube with a metal ball.The black coated housing is equipped with a practical carrying handle. Even a layman can use the station in a few minutes! You will also receive four different nozzles as well as spare tips for the built-in vacuum pick-up(extractor), so that you can work WITHOUT additional costs - CPU monitoredt!
- the digital display shows the accurate set temperature as well as the current temperature
- air flow rate is accurately indicated by the AIR FLOW METER
- perfectly suitable for repairing QFP, SOP, PLCC and SOJ components
- integrated temperature sensor ensures a constant temperature regardless of which air flow rate was set
- unique 15 minute stand-by automatic Sleep Modus. As a result energy is saved, if the station is needed again just touch the handle and the preconfigurated values will be activated again!
- Air flow meter precisely indicates the air flow all time long
- wide temperature and air flow adjustment range.
- the cold air cools off the heating element after use continuously, increasing the lifetime of the heating element
Delivery 7-15 days
Out of stock Minimum order quantity  
216,94€+VAT
-269,01€
PDS-853 PREHEATER METAL HEATING CORE
[3200099]
Preheater station QUARTZ DIGITAL 500W

Preheater station QUARTZ DIGITAL 500W

Preheater station 853 QUARTZ DIGITAL 500W whith 100-300 degree celsious.Compact preheating device preventing panel board distortion.
Fast heating and compact design.
Thermally stable with closed loop variable temperature control.
Emits air through carbonless brush system for longer usage life. Designed with hot and cool air adjustment especially suited for heating and cooling PCBs.Package content:
Main station, one pair G003 PCB magnetic holder. Power cord.
Delivery 7-15 days
Out of stock Minimum order quantity  
160,48€+VAT
-199,00€
PDS-853A QUARTZ PREHEATER INFRARED 600W (NEW)
[cod0015902]
Preheating Station AOYUE int 853A 600W Quartz IR with digital display

Preheating Station AOYUE int 853A 600W Quartz IR with digital display

The Aoyue Preheater int853A works with a fast Quartz IR heating element. The antistatic design prevents PCBs and circuits from being damaged due to static charging. The station has no engine and is therefore noiseless. The Preheater is delivered with a pc-board holder, which helps fix the printed circuit board on the station.
Including Display and temperature adjust volume set.
CE, ROHS, ESD SAFE
Delivery 7-15 days
Out of stock Minimum order quantity  
152,42€+VAT
-189,00€
PDS-857A++ HOT AIR STATION DIGITAL
[cod0016753]
New Hot Air AOYUE 857A++ SMD Digital Rework Station

New Hot Air AOYUE 857A++ SMD Digital Rework Station

New Hot Air AOYUE 857A++ SMD Digital Rework Station. The ideal hot air rework station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 857A++ is easy to handle and is equipped with a turbine pump that stands out due to optimum and constant airstreams. The station is clearly configurated and can be easily used! The temperture is indicated by the digital display, the values can be adjusted by a push button. Even an amateur can operate the station in a few minutes! You will also receive three different nozzles so that you can work without additional costs! The station is ready for use. You need only 2 minutes and you have a complete hot air station with which you can work.
Delivery 7-15 days
Out of stock Minimum order quantity  
153,14€+VAT
-189,89€
PDS-868 AOYUE HOT AIR SYSTEM
[3200088]
Σταθμός θερμού αέρα συγκόλλησης - αποκόλλησης

Σταθμός θερμού αέρα συγκόλλησης - αποκόλλησης

Σταθμός SMD με 4 ακροφύσια
Delivery 7-15 days
Out of stock Minimum order quantity  
149,71€+VAT
-185,64€
PDS-868D HOT AIR BAKU STATION
[3200183]
Hot air Rework station BK-868D with Display Led

Hot air Rework station BK-868D with Display Led

Hot air Rework station BK-868D with Display Led.
Display: LED
Power consumption: 700W
Air current: 120L/minute (Max.)
Handle length: 120cm (with wire)
Noise: Below 45db
Resistance between welding iron tip to ground: Below 2 ohms
Voltage of welding nozzle to the grounding: Below 2mV
Temperature range: 200 to 480 degrees Celsius
220V Europa plug
Including 3 round nozzle 1 small, 1 middle, 1 big
Delivery 1-3 days
Out of stock Minimum order quantity  
56,37€+VAT
-69,90€
PDS-878L BAKU BK-878 REWORK STATION
[cod0016793]
Hot Air and soldering station BAKU BK-878L Dual set

Hot Air and soldering station BAKU BK-878L Dual set

Short review BAKU BK-878L. Powerfull ESD-safe microprocessor controlled hot air soldering station suitable for soldering and desoldering the full range of SMD components. Temperature range 100 - 450 ºC. BAKU BK-878L is a powerfull ESD-safe hot air soldering station that is designed for soldering and desoldering operations with the full range of SMD components, including DIP, SOIC, CHIP, QFP, BLCC, BGA, etc. BAKU BK-878 hot air soldering station temperature range is 100 - 450 ºC.
Delivery 5-10 days
Out of stock Minimum order quantity  
80,65€+VAT
-100,01€
PDS-968A+ AOUYE REWORK STATION HOT AIR+SOLDERING
[cod0020584]
Repairing Station AOUYE 968A+ Hot Air Soldering Station 3in1 Box

Repairing Station AOUYE 968A+ Hot Air Soldering Station 3in1 Box

Non-contact soldering for high requirements.
The air volume and the temperature can be set or adjusted in a wide range, the nozzles can be easily replaced so that each component is soldered by using the suitable nozzle, air and temperature setting. Heating elements and nozzles conform to international standard; suitable for the most SMD components, for instance LEDs, SOIC, CHIP, QFP, PLCC and BGA.
The antistatic design as well as the microprocessor control of the 968A + multifunction repairing system prevents PCBs and electronic components from being damaged due to static charging. The control panel as well as the whole rework station are easy manageable. The built-in smoke absorber extracts the fume directly at the source where it is generated. The temperature of the soldering iron is showed on the digital display and can be adjusted by using the rotary knob allowing a fast and precise temperature setting.
The station informs the user via display about possible malfunctions at the sensors or at the heating elements. Another function of the station is the Aoyue Auto Cooling Function, it blows cold air on the heating element when the hot air is switched off until reaching a low temperature in order to extend the life of the heating element. The repairing system can also be used for heat shrink-tubing and is indispensable in the filed of chiptuning, repairing mobile phones, laptops and video game consoles.
high heating capacity
exact adjustment possibilities
auto cooling and follow up phase
SMD fine soldering iron
Blow nozzles in accordance with international standard
very fast heating suit
The station is delivered with a transport safety (a red cross screw that secures the pump during transport), diese must be removed before using the station for the first time! After removing the safety transport the sation is fully operational. You need only 5 minutes to remove the red cross screw and then you have a functional station. The temperature and the air flow can be adjusted via "AIR" and "Heater".
able for SOIC, CHIP, QFP, PLCC, PSOP, SSOP, BGA etc.
AOYUE Int 968A+ Package Content:
1 unit Int968A+ Main Station with Hot Air Gun and holder.
1 pc. B003A Soldering Iron with Smoke Absorbing function
1 pc. 1124 Air Nozzle
1 pc. 1130 Air Nozzle (Single 4.4mm)
1 pc. 1196 Air Nozzle (Single 7 mm)
1 pc. 1197 Air Nozzle (Single 9 mm)
1 pc. 1313 Air Nozzle
1 pc. 2660 Soldering Iron Stand
1 pc. Filter Vacuum Cap
1 pc. Black Filter Pad (round)
1 pc. G001 IC Popper
1 pc. Power Cord
1 pc. Instruction Manual
Delivery 1-3 days
Out of stock Minimum order quantity  
209,60€+VAT
-259,90€
PDS-AOUYE INT866 60W SET REWORK STATION
[cod0023460]
Hot air soldering station Aouye int866 Preheater 3in1 SMD Rework Station,

Hot air soldering station Aouye int866 Preheater 3in1 SMD Rework Station,

Hot air soldering station Aouye int866 Preheater 3in1 SMD Rework Station, Sirocco Series, board holder, Heat gun, soldering iron 60 W, Quartz Preheater, temperature sensor, lead-free.
The Aoyue Int866 3in1 PCB Hot Air Rework Soldering Station that is equipped with a powerful 60 watt soldering iron for lead-free solder, hot air and a 400 watt Preheater, is the all-round solution for your workshop. The antistatic design prevents the damage of the boards and the electronic components such as by static electricity. Of course, this station also disposes of a cooldown function so that cold air continuously cools the heating element after use. This increases the service life of the heater. The temperature control allows the soldering or unsoldering with the utmost care and security. The station disposes of a practical holder for the hot air handle and the soldering iron, thus enabling a very light and easy to work. The amount of air and the temperature can be adjusted within a wide range. The jets of the station can be easily replaced, so that each component can be soldered with an optimum nozzle, air and temperature setting. Heating elements and nozzles conform to international standards and are suitable for most SMD components, such as LEDs, SOIC, CHIP, QFP, PLCC, BGA suitable. The preheater, Aoyue Int 866, uses a fast heat up Quartz IR (infrared) heating element that is easily adjustable and infinitely variable. The gentle, uniform heating prevents the distortion, overheating and damage of the circuit boards. By a variety of display options, a large digital display allows the perfect control of the selected settings, temperatures and programs. With a total heating performance of up to 400 watts and a steplessly adjustable temperature range from 100 ° C to 480 ° C, this system offers everything you need for extensive work and repairs on a variety of plates, boards and circuit boards. Accurate temperature measurements can be made using an external temperature sensor anytime and anywhere on the component. With the integrated PCB holder almost all kinds of Printed circuit boards can be securely fixed and processed. This flexible system also allows an easy gripping of round or triangular boards without much effort. You get the base station Aoyue 866 for lead-free soldering including the following accessories:
- Soldering Iron (B012) with 60 watts and 10 Soldering Tips
- Hot air unit with handle (4 nozzles)
- Soldering Iron Holder with dry sponge and tin scraper
- Aoyue 939 Vacuum Pickup Set (WilTec-type 91939).
- Lifting device (IC Popper)
- Aoyue Toolkit - Case
Delivery 7-15 days
Out of stock Minimum order quantity  
233,79€+VAT
-289,90€
PDS-BGA PREHEATER AOYUE 853A REPAIR MACHINE
[cod0018500]
Preheater PDS AOYUE 853A SMD Repair Rework Circuits PCB

Preheater PDS AOYUE 853A SMD Repair Rework Circuits PCB

Preheater PDS AOYUE 853A+ SMD Repair Rework Circuits PCB.
The Aoyue 853A + preheater uses a fast Quartz IR (infrared) heating element, which is easily adjustable and infinitely variable. The gentle, uniform heating prevents distortion, overheating and damage to the circuit boards. A large digital display made possible by a variety of display options, a good control of the selected settings. With a total output of up to 500 watts and a continuously variable temperature range from 80 ° C to 380 ° C, this system is all you need to extensive work and repairs on a variety of boards, boards and printed circuit boards to be able to make. The integrated circuit board holders almost all kinds of printed circuit boards and printed circuit boards can be securely fixed and processed. This flexible system allows for easy clamping of round or triangular boards easily.
Delivery 7-15 days
Out of stock Minimum order quantity  
161,21€+VAT
-199,90€
PDS-BGA PREHEATER AOYUE 853A++ REPAIR MACHINE
[cod0021470]
Digital Quartz (IR) Preheater Aoyue Int853A++ (500 Watt / 80°C / 380°C)

Digital Quartz (IR) Preheater Aoyue Int853A++ (500 Watt / 80°C / 380°C)

The Aoyue 853A+ Preheater works with a fast heating element Quartz IR (Infrared) which is easily and continuously adjustable.The gentle and uniform heating prevents the printed circuit board from being distorted, overheated or damaged. A large digital display with its display options allows you to monitor the selected settings. The pre-heating system with a total heat output of 500 Watt and an adjustable temperature range from 80°C to 380°C provides all that is necessary for working on the pc boards or reapairing them. Accurate temperature values can be measured any time with the help of the external dual temperature sensor. Time and temperature settings can be saved and then run as automated programmes due to the user-defined profile. Additionally the preheating system offers three predifined rework-programms (time / temperature control) to suit different applications. Almost all circuit boards can be safely fixed and worked on due to the integrated board holder. This flexible system allows the user to fix triangular and round boards without difficulties.
Delivery 7-15 days
Out of stock Minimum order quantity  
185,41€+VAT
-229,91€
PDS-HOT AIR / SOLDERING STATION BAKU 702b
[3200195]
Rework hot air and soldering station Baku BK-702B

Rework hot air and soldering station Baku BK-702B

BAKU BK-702\B is a powerfull hot air soldering station specially designed for soldering and desoldering work with SMD components such as SOIC, QFP, PLCC, BGA, etc. BAKU BK-702A is a great choice for repairing small electronics, such as mobile phones and video cameras, as well as domestic appliances.
BAKU BK-702B Hot Air Soldering Station Technical Specifications
Power Input 220 V / 50 Hz
Power Consumption 350 W
Temperature Range 100 °C - 500 °C
Air Pump Type diaphragm
Pump Power 45 W
Airflow 0.3-24 L/m
Weight 5,3kg
BAKU BK-702A Hot Air Soldering Station Application Complete range of rework applications in medium and large scale service centers
Mobile and radio systems devices repair
Cellular phones, PDAs, handhelds, laptops, notebooks, and motherboards repair BAKU BK-702A Hot Air Soldering Station Package Contents BAKU BK-702A soldering station module (1 pc.)
Soldering iron (1 pc.)
Stand for soldering iron (1 pc.)
Hot air gun (1 pc.)
Power cord (1 pc.)
User manual (1 pc.)
Noozle ( 5 pc.)
Delivery Sortage
Out of stock Minimum order quantity  
80,56€+VAT
-99,89€
PDS-HOT AIR BEST 878D W/SOLDERING STATION
[cod0027956]
Rework station Hot Air BEST BST-878D, 700W with soldering station

Rework station Hot Air BEST BST-878D, 700W with soldering station

About the product
1. Sensor closed loop, microcomputer can control temperature automaticly with LED display, high-power heating element, rapid heating, temperature accuracy and stability, will not affects if has wind, the real lead-free soldering desoldering.
2. Adjustable air flow, air volume and a gentle wind, convenient temperature regulation, can be adapted to a variety of uses.
3. The handle is equipped with sensor switch, when you grasp hand held, it will work, and when you put it down, it will stop work.
4. The system is equipped with automatic cold air function, when cooled, automatically enter power-saving state, can prolong the life of the heating element and protect the hot air gun.
5. A compact body shell designs, durable, beautiful, occupying a small work table. Brushless fan has extremely long life, minimal noise.
6. Safe solder QFP, PLCC, BGA and other temperature-sensitive components. Solder Equipment
Operating Voltage: AC 26V+/-10% 50Hz
Output Power: 40W+/-10%
Temperature Range: 200 ~ 480 Degree Celsius
Temperature stability: +/-2 Degree Celsius (Static state)
Setting mode: Buttons to adjust
Display: Graduation
Temperature lock mode: Knob
Tip-to-ground impedance: <2ohm
Tip-to-ground voltage: <2mV
Tip: BST900-M-T-I
Heater: Four core ceramic heater
Delivery 5-10 days
Out of stock Minimum order quantity  
80,65€+VAT
-100,01€
PDS-HOT AIR BEST-852D HOT+SOLDERINMG STATION LCD
[cod0033140]
Hot air station BEST 852D Soldering 2 in 1 450w/50w Box

Hot air station BEST 852D Soldering 2 in 1 450w/50w Box

Switchboard
Rated voltage: AC 220V±10% 50Hz
Total Power: 500W±10%(Max)
Work Environment: 0~40? Relative humidity<80%
Storage Temperature: -20~80? Relative humidity<80% Hot air gun parts
Operating Voltage: AC 220V±10% 50Hz
Output Power: 450W±10%
Output Power: 450W±10%
Temperature Range: 100?~480?
Gas type: Pump air
Gas flow: 28L/min(Max)
Display: LED digital display
Noise: Less than 45dB Solder Equipment
Operating Voltage: AC 26V±10% 50Hz
Output Power: 50W±10%
Temperature Range: 200?~480?
Tip: BST900-M-T-I
Heater: Four core ceramic heater
Delivery 1-3 days
Out of stock Minimum order quantity  
161,21€+VAT
-199,90€
32 results where found.Go to page:1 | 2

Quick product search

Search by brand, model, product type, code, etc
   

Add to cart My shopping cart

Loading...

Members login

Username
Password
 

Remind me my username and password...
  

Newsletter


Subscribe to our newsletter, in order to receive information and special offers for our products.

Your email:
Message type:
 

Positive SSL

Terms of use | Shipping and returns To top
2006 © PDS Electronics. All Rights Reserved. Developed by TotalWeb | 2024-03-28 16:09:13.7628974 -07:00