Infrared BGA SMD rework station

Rework Station BGA ZM-R5860C LED Technology. Features:
Adopt liner slide which makes X,Y,Z axis all can do precision adjustment or fast positioning,
with high positioning accuracy and fast maneuverability high definition touch screen , PCL control, can save multiple groups profile,
password protection and modify function, and can save multiple groups profile,
equipped with instant temperature curve analysis functionï¼› There are 3 independent heating areas from top to bottom. The 1st and 2nd are hot-air heaters,

the 3rd is IR preheating, temperature controlled within ±3 °; Top heater can be adjusted freely,
second heater can be adjusted up and down,
top and bottom temperature can control many groups and sections of temperature parameters at the same time
the third IR heater can be adjusted the power consumption Offer all kinds of hot-air nozzle, it can rotate 360°ï¼›With magnet,
easy to install and change, customized is available; Bottom IR heater ensure an even heat for PCB board; Choose imported high-precision K-type thermocouple,
closed loop control and automatic temperature compensation system,
combined PLC module for the precision control of temperature. Use a V-groove equipped with a flexible fixture for PCB positioning to protect the PCB from deformation when heated or cooled,
and it can rework for any BGA package size; powerful cross-flow fan rapidly cool the PCB board to improve efficiency
Also built-in vacuum pump and external vacuum suction pen, pick up the chips rapidly After finishing desoldering & soldering, There is an alarming and alarming in advance CE certificate, with emergency stop and Automatic power-off protection device when abnormal accident happens
with a double over-heating protection control. A total power of 4850W
upper heating power 850W
the second temperature lower heating power 1200W, the third (IR) temperature 2800W
Power AC220V ± 10% 50/60Hz
dimensions 630 × 650 × 690mm
V-shaped positioning slot, PCB stent X, Y in any direction to adjust and configure the universal fixture
K-type thermocouple temperature control (K Sensor) closed-loop control, independent temperature control, accuracy up to ± 3 degrees;
PCB dimensions Max 410 × 370mm Min 20 × 20 mm
selection of highly sensitive temperature control module electrical Delta PLC + Taiwan + touch screen
Weight 85kg

Seamark ZM BGA Rework Station ZM R380B is an excellent rework station for laptop motherboards, desktop computer motherboards, server boards, industrial computer boards, all kinds of game boards, communications equipment motherboards, LCD TVs and other large circuit board BGA rework. The BGA Rework Station ZM R380B has bottom IR heating and the top is hot air heating. The top and bottom heater work independently. A cross-flow fan cools rapidly to protect the PCB from deformation when soldering. The ZM R380B allows you choose imported high-precision materials (temperature sensor, PLC, heater) to control the BGA desoldering & soldering procedures precisely. This machine has a computer communications function, built-in PC serial port, external temperature interface with software to achieve computer control. A high-precision thermocouple is used to achieve the precise temperature detection. The BGA Rework Station ZM R380B Uses a V-groove support equipped with a flexible fixture for PCB positioning to protect the PCB. Large thermal capacity on PCB or other high-temperature and lead-free soldering requirements can all be achieved with the ZM R380B.
Main Features:

1.The bottom is IR heater; The top is hot-air heater.

2.Choose imported high-precision materials to control the BGA desoldering & soldering procedures precisely. 3.Has a computer communications function, built-in PC serial port, external temperature interface with software
to achieve computer control. 4.High-precision thermocouple to achieve the precise temperature detection. 5.The top and bottom heater work independently. A cross-flow fan cools rapidly to protect the PCB from deformation
when welding. 6.Use a V-groove support equipped with a flexible fixture for PCB positioning to protect the PCB. 7.For large thermal capacity of PCB or other hightemperature and lead-free welding requirements,all can be handled easily. 8.With hot-air flow adjust device, to improve the welding effect of BGA. Technical specification : Total Power – 3300W Top heater – 800 W Bottom heater – Infrared plate 2400 W Power supply – AC 220V ± 10% – 50/60Hz Dimensions – 445*430*500mm Positioning – V-groove, PCB support can be adjusted in any direction and with external universal fixture Temperature control – K-type thermocouple (Closed Loop), heating independently, the precision is ±3 degree PCB size – Max 310*300mm Min 20*20 mm Net Weight – 25 kg

By controlling the position of the touch screen and precise temperature control three heating surfaces, replacement of systems it becomes extremely simple. The sensor system makes it possible to observe the process, and the extra equipment makes it an attractive station in this price range.
Device includes a touch screen and microprocessor control of soldering process. Monitor shows a three temperature graphs, giving a view on actual values, there’s a possibility of analyzing its process after it has finished, even on PC, by connecting via USB port.
Every solder profile have from 8/6 temperature sections. Perfect temperature control system assures a successful solder.
Ability to save up to 50 profiles of soldering processes. After the process is complete, you can analyze its proceed.
Three separate space heating surfaces: first and the second ones are a hot air inflow and the third one is the quartz heater. The top heating element is regulated at each surface, and the bottom one is height adjustable. The third surface heats a board, reducing a tension over a large area and lowering the temperature required for proper solder of the element.
Alarm turns on after finishing of desoldering and soldering. When the temperature goes out of control, the electric circuit can be automatically cut off by a protection system against excessive heat.
Strong transverse fan cools the PCB board automatically after use to prevent a deformation of PCB and protecting a reballing effect by reducing the time of heat influence on the board to a minimum.
Handle of the motherboards are equipped with a V-groove, which provides a fast and stable installation of the panels and a large range of adjustments.
Due to the high power, device is adapted to work with a large motherboards made in the both lead and lead-free solder technology.
The hot air nozzle using the magnetic technology replacement can freely rotate at 360° and can easily be set.
Station includes the CE, emergency switch and double protection against an overheating.

Automatic BGA Rework Machine ZM-R6810 for chip repair
1, Automatic Model
2, Optical Alignment Vision System
3, PLC Control，Panasonic serve system
4, Smoke Absorbing System
5, Mesh Protection on the IR heaters

Product Description
LED and BGA Rework Station ZM R720 The LED and BGA Rework Station ZM R720 is suitable for LED lamp beads repairing, size of micro LED components not less than 0.6*0.6mm can be repaired. Suitable for LED lamp beads of tape packaging and bulk materials, Also any BGA and components which are difficult to repair. The LED and BGA Rework Station ZM R720 uses high solution optical alignment system, accurate LED components positioning, ensure precise mounting. Optical alignment is controlled electrically, and can rotate automatically. A mounting head built-in pressure testing device is fitted to protect the PCB. The LED and BGA Rework Station ZM R720 comes with a built-in infrared laser positioning for fast positioning of the PCB. The ZM R720 is fitted with HIWIN precision guide rail for up and down movement system, ensure reliable and accurate running. The system adopts an up and down alignment for top and bottom heater. Heating for appointed local zone prevents PCB to turning yellow. Bottom heater up and down can be manually adjusted for heating height real time. LED and BGA Rework Station ZM R720 has ceramics infrared radiator for IR heater, heating stably and uniformly which preserves the life. Human-machine interface has multiple operation mode and permission, soldering, desoldering and mounting manually for easy operation. The LED and BGA Rework Station ZM R720 has a high resolution touch screen, which is up to 800*600 pixels. A joystick control for alignment system is used and so no need for setting complicated parameters. A Delta double ball bearing flow fan for air supply is used and so no need for an external air source. Adopts DCCE 6 channel module for temperature control system, automatic PID adjustment. Monitoring heaters real time, when accident happens, relevant sensors will send signal to PLC, which will close output channel and display fault condition.
Technical Parameters Total Power – Max 5300W
Power – AC 220V±10% 50/60 Hz
Top heater power – 1200W
Bottom heater power – 1200W
IR power – 2700W
Hot air temp – 400℃ (Max)
Preheating temp – 400℃（Max）
Positioning – V-groove +laser positioning+ universal fixture
PCB size – Max 410×370 mm
Preheating size – 370mm×270mm
Chip type – BGA, QGN, CSP, POP, QFN, Micro SMD, LED lamp beads
Chip size – Max 80×80mm Min 2×2 mm
Dimensions – L640×W630×H900 mm
Temperature sensor – 1Pc
Net weight – 70k
Colour – White

New Infrared replaced Lamp Bulb for BGA Rework Station T-862 or T-862++.
Diameter: 50mm.
AC/DC 12V 100W.
Compatible with: Tai'an Puhui T862 T862++ BGA machine

ADVANCED REWORK REFLOW SOLDERING STATION.
BGA/IRDA/IFR/SMD/SMT WELDER.
IT DOES CHIPS UNTIL 35mm, TOPS 40mm WITHOUT LENSES AND 50mm FROM SURFACE. THE PLATE IS 120 * 120mm the equipment is SOLDERING IRON, IRDA HEATING PLATE AND INFRARED BEAM ONLY. IS MIDDLE CLASS PRICE, BUT WILL HAVE LENSES ON THE BOTTOM OF THE BEAM. HAS 2 LENSES TO GRADUATE TEMPERATURES. THIS MACHINE DOES YOUR HEATING SOLDERING , LAPTOPS, MEDIUM BOARDS AND ALL THE MINI ONES.

Adopt infrared weld technology which independent exploration.
2. Use infrared heat,it is easy to cut through,heat proportion piercing tradition weld machine with sirocco.
3. Easily operate.Just need one day training.Can operation this machine.
4. No need weld tools,it can weld all the component of 15x15-35x35mm.
5. This machine has 650W heating system.widely to 120x120mm.
6. Infrared heating no have sirocco flow. Don't impact perimeter scomponent. Can suitable for all of the component,especially Micro BGA component.
Description

Features:
1. This machine has the strong and perfect function selection, with eight temperature waves in the memory software, you can select the right temperature wave according to the solder/unsolder request.
2.Intelligent temperature wave heating, can achieve the solder/unsolder automatically.
3. Three-dimensional adjustable lamp body, use laser light, suitable for unsoldering any-angle components.
4. PID intelligent temperature control can avoid the IC damage due to the fast or uninterrupted warming up.
5. This machine has a super hot melt system, use infrared welding technology which is developed independently, heat is easy to pierce and distribute evenly, can suit for a variety of computer, notebook, play station’s BGA components, especially in a Northbridge/ Southbridge chipset of computer.
6. Friendly human-machine operation interface, perfect LCD display, you can watch the whole repairing process very clearly.
7. Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T-890 to be easily bench positioned, transported or stored.

The Aoyue Station Int. 732 connects a big Preheater with a high power Quartz Top Heater (Gun) and lead-free soldering station. With this station is possible to carry out 3 types of repairs on game stations. • With the internal temperature sensor you can reball or resolder already soldered chipsets
• With the external temperature sensor you can control the manual rework process yourself
• The fully automatic reflow process can also be employed by the user. By means of sensors, which can be attached to the PCB, a precise temperature control is posible, this reduces temperture-induced PCB board damages.
Two sensors are used to monitor and control the temperature, a further sensor serves for monitoring other areas of the PCB, that possibly contain temperature-sensitive components. The 310x310mm sized Quartz-Preheater with 1500Watt reduces the PCB Bord-deformation. The 60x60mm sized Quartz-Gun works reliably with 500Watt to solder the BGAs. The system is equipped with the new PCB Bord holding sytem from Aoyue, this multi-point holder has nine safely bolts to hold firmly the different board sizes. The system is CPU controlled and has a digital display that is easy to use. The device has a built-in overheat protection that limits the temperature. The system limits automatically the temperature rise (industry standard), this amounts only to 3°C per second. This minimizes damaged of sensitive electronic components and ensures a clean operating process. Operation of Aoyue Infrared Soldering Stations The heating of the components results from the absorption der IR-radiation. Because the metal connections of the components only have a low absorption, that is they reflect the IR-radiation, the heat has to be conveyed to the soldering points mainly over the component itself, over the PC board which is also heated and the surrounding air. For this reason one works with both radiators (Preheater from the underside and IR-light from the upper side ), to heat or preheat the whole surrounding area of the soldering point. The temperature of the single components can vary greatly. The absorption depends on the material and the wave-length and this in turn depends on the temperature of the radiator. The heating of large and thicker SMDs is slower than that of small and thin SMDs.

Rework station infrared Achi IR6500 /HR6000 is a two temperature zones BGA, and the top-1200W is hot air head and bottom-800W is infrared heater, Use is for repair cell phones,PCB boards,BGA chip 5*5~55*55, Minimum chip spacing is 0.15mm, weight 16kg, 470×430×470mm.
Product Description
SCOTLE-H6000 cheap hot air BGA rework station
1)Cheapest hot air model
2)Profession for mobile phone and xBox reworking SCOTLE-H6000 cheap hot air BGA rework station Scotle HR6000 is a two temperature zones BGA rework station, and the top is hot air head and bottom is infrared heater. Scotle HR6000 is designed by an excellent team with very experienced technicians from UK who did BGA rework for 8 years, it will definately more friendly to users. Scotle HR6000 is designed for repair cell phones, xBox, and other consumer electronics with not large PCBA boards. We have 110V and 220V Scotle HR6000 for your selection. Scotle HR6000 technical details is as below: Total Power 2000W
Top heater 800W
Bottom heater 1200W
Power AC220V± 10%/AC110V± 10% 50/60Hz
Dimensions L470× W370× H500 mm
Positioning V-groove, PCB support can be adjusted in X, Ydirection with external universal fixture
Temperature control K thermocouple (K Sensor)Closed loop
Temp accuracy ± 2 degree
PCB size Max 300mm*300mm Min20mm*20mm
BGA chip 5*5~55*55
Minimum chip spacing 0.15mm
Net weight About 14.5KG Scotle HR6000 main features as below: 1. It is two temperature design and the top is hot air head and bottom is infrared head. The two temperature zones are independently controlled with high precision controller. 2. Scote HR6000 can store 10 groups temperature profiles. And can set 8 segments ramp up and 8 segments constant temperature. 3. Scotle HR6000 applies high precise k-type thermocouple with closed-loop control and it is also automatic temperature compensation system. And external temperature sensor can help to analyze and certify the temperature parameters of the actual temperature profile. 4. With PLC and temperature module, Scotle HR6000 can keep the temperature deviation within ± 2 degrees. 5. Scotle HR6000 uses removable V-groose design fixture which makes PCB board of different sizes positoning easily, quickly and safely. 6. Scotle HR6000 is also equipped with universal removable pole which can protect PCBA from deformation, and also can avoid damaging the surrounding components. What's more, it is suitable for irregular PCB board with different sizes of BGA. 7. Scotle HR6000 is equipped with different alloy hot air nozzles for different size BGA rework and those hot air nozzles can be rotated in 360 degrees which are very easy to be installed, positioned and replaced. 8. Scotle HR6000 is with alarm function which will buzz when the soldering or desoldering is about to finish. 9. After finishing the soldering or desoldering, there is large flow cross fan to cooling the PCB which can prevent PCB deformation and get to the soldering effect. 10. Scotle HR6000 is equipped with emergency stop switch and automatic power-off protection device in case of emergency happening.