Glass Rework Remover Station

Pack of 10 flat pens in the following sizes: (4 pieces), 0.7mm (3 pieces) and 0.8mm (3 pieces). 
Different sizes / thicknesses allow you to achieve the desired dimension. 
Classic pen shape with a wide surface and rounded tip. Solid color Made of nylon material for long-lasting durability, ultra-smooth, glossy finish

Cutting and degumming, Motor forward and reverse direction, 6-speed adjustable speed, High precision cutting

Standby for 300 days, continuous use for 16 hours, using 18650 battery/2000mAh, large motor, stable and not shaking

Say goodbye to hand rubbing glue, no liquid medicine, easy to remove curved screen glue/cold light screen/backlit screen/original hard glue/OCA glue, etc.

Green light dust lamp, Type-C charging

Straight, thin and neat, not easy to break the screen, suitable for cutting covers/brackets, removing screws and other applications

Effectively block dust/splash of cover plate fragments, and the cutting width can be adjusted at will to adapt to different models

No need for screws to fix, fast installation and replacement, convenient and fast

Any key to start, 10 seconds no operation automatically shut down

Mobile Phone LCD Screen Opening Separator Machine Heating Pad Repair Mat for Samsung Huawei Xiaomi etc

The heating panel uses a flexible heating material to help to separate the screen, the heating capacity is more evenly than a hot air gun

Soften the adhesive surface quickly to separate the screen safer and more convenient

Greatly reduce the probability of damaging the split screen

Wide application and strong applicability


Voltage: 220V / 110V
Power: 350W
Separation size: 210x300mm
Machine size: 210 x 350 x 55mm
Net weight: 1KG

How To Use:

Setting temperature 60-80 max

Place the mobile phone in the demolition screen (LCD facing up)

Preheat for 5-10 minutes

Testing the softening of mobile phone LCD side glue with screen Removal Tool

Determine that the softening can be disassembled

Compatible with:

iPhone series

Samsung, Huawei, Xiaomi etc

Package included:

1 x LCD Screen Separate Heating Separator Repair Tool
1 x Plug
1 x English and Chinese Manual

LCD Separator for heating LCD displays and back glued covers. Can be used for phones, tablets and various electronics up to 11 inches (approx. 28 cm) in size
Advantages:
Quick response
Uniform temperature
High heating speed

The heating pad facilitates the process of detaching the double-sided adhesives from the frames or back covers.
Silicone material useful for opening mobile phones and tablets
With 3 holes for screwdrivers
Working area: 350mm x 210mm (Diagonal 360mm)
Rated voltage: 220v
Rated power: 350W
Adjustable temperature: 0°C - 120°C
USB output: 2 x DC 5V/2.1A
Product dimensions: 350 × 213 × 50mm

Characteristics:
1. Extremely high temperature, stable temperature, higher efficiency.
2. Made of high quality silica gel, soft and high elasticity.
3. 220V switch

It can be used for most brands such as
Samsung - Apple iPhone & iPad - Asus - LG - NGM - Wiko - Huawei - HTC - Nokia and others.

FEATURES:
REMOVES DIGITIZER FROM YOUR SMART PHONE Apple iPhone 5, iPhone 5S, Samsung I8910, I9100, I9103, I9105, I9220, Galaxy S3 I9300, I9305, Galaxy S4 4 I9500, I9505, Galaxy N7000 Note, N7005 Note, Galaxy N7100 Note 2, N7105 Note 2 Cell Phones.
SMART AND EASY WAY TO REMOVE DIGITIZER

Special tool for Touch Screen & LCD Separating Machine for devices until 7 inch.
Item Features:
1. Extendable adjustable precision alignment frictional 4 arms moulding to hold the glass in the platform stably
2. Compatible for maximum size under 7 inch, you can do the refurbishment on iPhone 4 4S 5; SAMSUNG Galaxy Note 2 S3 S4; HTC; LG; Nokia, etc
3. Automatic heating and protection system
4. 2 bearing beside keeps you hand from the hot platform and make your wire last long on using
5. Compatible for 85V to 265V
6. Tempreture of the platform is about 90 centigrade,the maximum is 400 centigrade
7. Holes on the bottom beside for screws to help the machine stay stably on the table
8. Anti static body, prevent yout flex cable on the LCD LED being damaged by the static
9. You can use the machine to do the job on iPhone 4 4S iPhone 5 5S 5C/Samsung Galaxy S2 S3 S4 note I II III etc
10. Easy installation
11. 4 stronger arms to press the touch screen glass on the plate
12. Smooth metal plate to hold the touch screen without any damaged
13. 2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform
14. Compatible for LCD or LED screen assembly
15. High quality black metal material, it is more durable and longer life.

User Guide:
1. Put your lcd with touch screen on the mtal plate,lcd side above
2. Set the 4 arms to keep the touch screen on the metal plate stably
3. Turn on the machine and wait for the metal plate become 80-100 degree
4. Start to separate the LCD LED off the glass with a core,then right and left movement with the core in between the lcd and the glass,please notice you must using gentle power and keep the core stay on the lcd surface,so that it will avoid the touch screen be damaged
5. Finally you will find yourself do a good job,now start to get a well pay business!!

Separator machine UYUE 948 MAX Rotating LCD Screen Built-in Vacuum Pump for iPhone Samsung etc,....

UYUE 948 MAX Rotating LCD Screen Separator Machine Built-in Vacuum Pump for iPhone Samsung - AC 220V

360 degree rotary

Universal rotary degumming

Built-in vacuum pump, no need screen clamp

Smooth plate to hold the touch screen without any damaged

Easy to operate, manual separating

Size: 155x245x150mm

Package included:

1 x UYUE 948 MAX Rotating LCD Screen Separator Machine

Other item not included

Mobile Phone LCD Screen Opening Separator Machine Heating Pad Repair Mat for Samsung Huawei Xiaomi etc...

The heating panel uses a flexible heating material to help to separate the screen, the heating capacity is more evenly than a hot air gun

Soften the adhesive surface quickly to separate the screen safer and more convenient

Greatly reduce the probability of damaging the split screen

Wide application and strong applicability

How To Use:

Setting temperature 60-90

Place the mobile phone in the demolition screen (LCD facing up)

Preheat for 5-10 minutes

Testing the softening of mobile phone LCD side glue with screen Removal Tool

Determine that the softening can be disassembled

Specification:

Model: WL 1805+

Temperature adjustment: 30 - 220°C

Heating pad material: soft silicone

USB output: 2XDC 5V/2.1A

Rated power: 350W

Size: 360 x 210 x 7mm

Applicable industries: machinery repair shops, retail

Compatible with:

iPhone series

Samsung, Huawei, Xiaomi etc

Package included:

1 x Screen LCD Separate Heating Separator Repair Tool
1 x Plug
1 x English and Chinese Manual

This is 2 in 1 vacuum separator machine,Not only can Separate phones,and also can Separate tablets.
It can use for 220v, Low noise,built-in vacuum pump ect , only need you plug in power line, then you can use it.
When you need Separate phones press button S2
Phones Operation steps:
1.Turn on the power switch,Set the temperature to 80℃,After 2-3 minutes,the temperature of heated plate reach 80℃.
2.Put the silica gel on the heated plate holes to holes,Put downwards the screen onto the silica gel.
3.Press the S2 key,After the screen being sucked,Separate the LCD from glass by steel wire,Take off the LCD,The operation steps of screen separation is finished.
When you need Separate tablets then press button S1+S2


Voltage supply: 110V/220V,60Hz/50Hz
Compatible with: Μost of mobile phones (Touch Screen from 7 until 12 inch)
Power: 600w
Heating size: 190 x 290mm
Size: 370 x 280 x 120 mm
Weight: 5.5kg
Temperature Range: 50 °C- 400 °C (Please use no more than 100°C to avoid thermal damage to the device.)
Temperature Display: 3 digits( 1 °C)
Heating Element: Resistance Heater
Product Certification: CE Certified, FCC Certified, RoHS Certified
Heating method: PTC Heating

Desktop platform pre-heater set MP-946A for remove all Digitizer touch screen panel.
Package included: 1 x Touch Screen and LCD Separator.
This LCD Separator machine has removable screen clamps. This means it can also be used as a preheating table for iPad / iPod / Smartphone Lens Removal as well as used for Samsung Galaxy and iPhone, htc, Sony screen separating too.
Desktop platform pre-heater for remove all Digitizer touch screen panel.
Model BK946A FEATURES:
REMOVES DIGITIZER FROM YOUR SMART PHONE Apple iPhone 5, iPhone 5S, Samsung I8910, I9100, I9103, I9105, I9220, Galaxy S3 I9300, I9305, Galaxy S4 4 I9500, I9505, Galaxy N7000 Note, N7005 Note, Galaxy N7100 Note 2, N7105 Note 2 Cell Phones.
SMART AND EASY WAY TO REMOVE DIGITIZER.
ech Spec.

The device useful for heating LCD screens goal of separation from the touch panel screen on mobile devices eg. smartphones or tablets.

The top heating portion is made of a thick aluminum plate, whereby the temperature uniformly distributed on the surface. After heating the adhesive to a temperature of about 80-100°C softening of the structure, making it possible to make the separation of the touch screen of the display.

Power: 110 V/220 V
Power consumption: 30 W/50 W
Frequency: 40 kHz
Capacity: 500 ml
Inside dimensions(mm): 165 x 85 x 45
Outside dimensions(mm): 185 x 150 x 100

Preheater machine Power 250W , weight 8.3kg, size hotplate 42x31.5cm, Indoor temperature is 26 degree, this modelseparator rising to 100 degree only needs 3 minutes.
Large double fuse protects the separatorfrom damage,which is more safer !!

1. Re-upgrade, 17.5-inch large work area, to meet the needs of mobile phones and TAB phone.

2. Built-in two powerful vacuum pump.

3. Double control suction control, partition suction, more accurate.

SUPPLY：AC100-240V 
POWER：250 W 
SIZE：42*31.5*120CM 
PLATFORM SIZE: 30X19CM=17 inch 
N.W. : 7.5KG 
Carton : 405*305*170MM 
G.W. : 8.7KG

 

Multifunctional to separate LCD from Touch Screen to Vacuum YX989 with stove;
The product counts on an innovative vacuum suction system that does not need loops;
Brand Name: YaXun
Base heating consumption: 550w
4 UV lamps: 9w each
36w drying oven for each UV glue
USB port: 5V 1A
Package Size: 40cm x 25cm x 25cm (15.75in x 9.84in x 9.84in)
2 4-digit displays
Auxiliary Led Lighting
Heating base: 20cm length x 11cm width
Silicone film for the base
Voltage: 220v
Weight 6.5kg (14.33lb.)

Professional LCD Separator Machine BEST B968 Glass Screen Removal (for Smart phones or Tablet).
Brand new LCD separator machine for Tablet. Use this machine to separate the broken glass from LCD display assembly so you can reuse the LCD. The unit heats heat up the screen assembly to loosen the glue that holds the glass and LCD panel together so you can remove it with a Molybdenum wire.

Product Description
This machine is used for apple and Samsung HTC domestic touch screen, split screen assembly, now a lot of mobile phones (including apple, Samsung) touch screencracked or broken, the cost of repairing is very high, they generally required depot repair. Or need to purchase the equipment, complete set is very expensive including machine, SMT machine, laminating machine and defoaming machine. This store waterglue laminating process, without equipment, do not need space, suitable for ordinary repair shop. Low cost. Replace the glass cover plate or a touch screen cost just a few dollars, for good and not much difference.

Function:
1. multifunction vacuum separator
2. Built-in vacuum pump, UV lights.
3. With iron, maintenance lamp.
4. Supports up to 10-inch mobile tablet Ipad



Application:
Used to divide, repair cell phone screen, LED display
Component heating work, SMD reengineering work,PCB removing,soldering work

Warning:
1. The table should be in tidy and the material must be heatproof
2. When itʼs working, should be careful to keep away from getting burned
3. Pay attention to the heating element, high temperature will damage it.
4. Do not use heating plate near the combustible and flammable objects.
5. Do not move or touch the machine until itʼs power off and cooling down .
6. This machine is high temperature electronic product. In case of any accident happen, remember to cut off the power while not use it.
7. Do not use the machine in high temperature (up to 300 degree) for a long time. Usually, no more than 8h.

Note:
1. Must ensure the machine connects ground wire
2. Do not let air flow blows on the plate directly, or it will affect the heating machine

Rated power supply : AC220V 50HZ
Rated Power : 2100W
Temperature control range : 0-400 C
Working size : 500*200mm
Outline size : 500*235*189mm
Net weight : 9.8kg
Gross weight : 11kg

Remove Glue and A-frame Separator Machine 5 in 1 S-958 with Built in Vacuum Separator.

Technical Details

Feature: Built in vacuum manual
Power: 500W
Power Supply: AC 220V
Size: 250*320*415mm
Weight: 15 kg

Hot plate 16 inch machine separate 95 celsius inner dimension 23x33,5cm

LCD glue remover big size lcd freezer separator machine for Samsung S6 edge, S7 edge repair.
Product Description:
Name: Freeze Screen Separator
Only Freeze Size 30*20cm
Freeze Time: 40 minutes
Voltage: AC220V (can't use in 110V Power directly, need buy extra transformer )
Power: 2200W
Work Temperature: 20-25℃
Separating Temperature: -130 to -140℃
Temperature Range: 0 to -140℃
Weight: about 110kg
Futures:
Small size freeze screen separator, -150℃ separating touch screen
Separating touch screen in several minutes
Higher efficiency, higher performance than the traditional heating separator machine
Low cost and much safe than liquid nitrogen freeze separating mode
Fluoride-free refrigerating fluid is adopted, environment-friendly


Package Contents:
1 X Freeze Screen Separator
1 X Power Cord