Product categories
Computer, Notebook, PC, PDA
Apple (Parts + Accesories)
Batteries
Bluetooth devices, GPS, Drones
Cables Universal
Handsfree headset
Hardware Service Tools
Lot products no category
Memory Cards, Flash Stick
Mobile phone Cases
Mobile phone charger
Mobile Phones, Sim card, Dummy
Security System
Spare repair Parts Mobile Phones, Smartphone, SmartWatch
Tablet
Telecomunication
Antenna GSM Multi Band
Corded telephone phone system
Cordless phone
FAX
Fax, copier, scanner
Fixed cellular terminal GSM
Gps Systems
PBX Telefon centre
Repeater ,Booster for GSM, DCS, VHF, UHF
Router 3G/4G
Satelite Systems
Transceiver PMR, VHF, UHF, DMR, POC
VOIP
WiFi Antenna 2.4Ghz, 5GB
ULTRASONIC Cleaner, Liquid
Home devices
|
|
Fixed cellular terminal FCT ERICSSON 251 FAX (REFURBISHED)
Click image to zoom
|
ITEM: | FCT-251 GSM FAX CELLULAR TERMINAL ERICSSON RFB |
CODE: | cod0020961 |
217,66€+VAT 269,90€
Last modified on 22/11/2018
|
ERICSSON F251m (completed production) (REFURBISHED) Ericsson F251m SOHO outwardly resembles its predecessor F151s but its functionality has been extended with a built-use data and fax. This enables data transmission standards GPRS and HSCSD as well as data transmission via the built-in analog modem V90. F251m also allows you to send SMS. The device accommodates a battery that provides work F251m case of power failure. The device is attached to the city's port analog telephone subscriber by allowing direct connection to the GSM network apart from the cost of fixed-line operator. For the device, you can also attach up to three analog telephony devices as analog phone, fax machine or fax modem. Using ISDN adapter, you can connect two devices F251m to port ISDN 2B + D PBX. There are different adaptations F251m eg. Remote wireless monitoring of premises (using cameras), remote transmission of alarm or provide the full range of telecommunications in areas that do not have fixed-line telecommunications infrastructure - voice, fax, data transmission, Internet. An important feature of F251m is signaling the start and end calls by reversing the polarity. This property allows precise connection time and so accurate pricing in the PBX.
Technical data The radio interface: GSM 900, GSM 1800 and GSM 1900 GSM 900 Frequency range: TX 880-915 MHz, 925-960 MHz RX Power Output: Maximum 2W (33 dBm) Power class 4 GSM 1800 Frequency range: TX 1710-1785 MHz, 1805-1880 MHz band RX Power Output: Maximum 1W (30 dBm) Power class 1 GSM 1900 Frequency range: TX 1850-1910 MHz, 1930-1990 MHz RX Power Output: Maximum 1W (30 dBm) Power class 1 Data Transmission: GPRS Class B Multislot HSCSD (baud rate zależyod GSM operator) Speech codecs: Half Rate, Full Rate and Enhanced Full Rate RS232 INTERFACE Data Services: All applicable GSM 7.07 AT commands SMS: All applicable GSM 7.05 AT commands Line interface: Telephone Speech Analog fax: Group 3 facsimile transmission Analog date: V.90, V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A & 103 CLI ETSI DTMF and V.23 FSK; Bellcore FSK The line impedance: 600 ohm (default) Line current 25 mA (off-hook) Line voltage: 48 V (on-hook) Ringing tone with 45 Vrms Load: 3 REN; up to 3 telephone devices Signaling the start, the call: Reverse polarity and interrupt SLOTS RJ11 (a / b two-wire line); POTS interface RS232 port DB-9 serial COM interface GSM Antenna: SMA plug-female (50) SIM Card: small, 3V or 5V Vdc input: 7.5 Vdc [± 0.4V]; 0.8 A (jack: EIAJRC-5320A class 4 male) ANTENNA (included) Frequencies: Triple-band E-GSM 900, GSM 1800 and GSM 1900 Characterystyka: Omni POWER SUPPLY (included) Input AC 100 - 240 Vac; 47 - 63 Hz CLIMATE Operating temperature: -10 to + 55 ° C Operating Humidity: 20 - 75% Storage temperature: -40 ° C to + 85 ° C Storage humidity: 5 - 95% Battery backup power supply: 6 Vdc 1.2 / 1.3 Ah Lead-acid battery Contents of the kit: F251m business, AC adapter, Telephone cable, set for wall mounting, The internal antenna. Dimensions: height 148 mm, width 165 mm, depth 45 mm WEIGHT: 300 grams (without battery) Applications Fixed cellural Terminal (FCT) FCT enables rapid installation of phone line using digital cellular network infrastructure. Quick assembly / disassembly with minimum purchase and operation costs make a payback period of extremely short. Construction of a new line of access for the user is as simple as installing a new terminal FCT. By utilizing the FCT user you gain greater flexibility for users of mobile network planning and building their own private network. GSM operators provide competitive services, both in dense urban areas and remote rural areas. Applications Single Line Module The main part of the FCT is SLM (Single Line Module), which is a single linear module, which consists of a transceiver (transceiver), the line interface and the control unit. When the reserve power is not required, the SLM can be used independently, offering the same functionality as the FCT. SLM wall mounting or his work on the desk shortens start-up time and thus maximizing the return on investment.
|
Quick product search
My shopping cart
Members login
Remind me my username and password...
|
Positive SSL
|