Product categories
Computer, Notebook, PC, PDA
Apple (Parts + Accesories)
Batteries
Bluetooth devices, GPS, Drones
Cables Universal
Handsfree headset
Hardware Service Tools
Lot products no category
Memory Cards, Flash Stick
Mobile phone Cases
Mobile phone charger
Mobile Phones, Sim card, Dummy
Security System
Spare repair Parts Mobile Phones, Smartphone, SmartWatch
Antennas
Button (joystick,on-off...)
Buzzer polyphonic music IHF
Camera internal mobile phones
Contact battery, and others..
Flex cable Hinge Ribbon
Hinge System
Housing Cover Mobile Phones
Internal pcb parts PA, IC, CR, A.S, MATRIX...
Keypad UI module board, lcd board
Keypads
Lcd Display mobile phone and Smartphones
Leds
Main pcb boards
Mechanic Slider system
Microfones
Parts
Pen stylish
Plug in charging system connector, Board
RF signal cables
Speaker voice
Switches (joystick,on-off...)
Tape for LCD, Touch, Battery Cover
Window Glass Len, Touch screen Digitizer panel
Adhevise Glue
Tape double sided for touch glass
Tempered glass Display protective Film
Tablet
Telecomunication
ULTRASONIC Cleaner, Liquid
Home devices
|
|
Original HTC Wildfire S (G13) Universal Rev2 No Code Touch unit panel with digitizer
Click image to zoom
|
ITEM: | LEN-HTC WILDFIRE S (G13) TOUCH UNIVERSAL NO/CODE |
CODE: | 1601853 |
24,11€+VAT 29,90€
Last modified on 16/4/2019
|
Original HTC Wildfire S (G13) Touch unit panel with digitizer (For all versions)
HTC Wildfire S G13 Digitizer (Universal Version) - When fitting please make sure a sw update and calibration is done To All Customers,
Htc as well as blackberry have different revisions and ics on digitizers as well as lcds.
On most HTC repairs when replacing the digitizer, the software needs updating. (especially on sensation, wildfire S and Mozart) The newer models to follow will also need a sw update and calibration.
To simply enable this process we suggest you do the following:
1. hard reset or firmware/software update 2. calibration ( this can be done via the XTC CLIP/hxc dongle) - You need this clip if youre replacing touchpads on the HTC
Steps with XTC CLIP: If you already have access to the diag file follow these simple steps
Make a gold card (plenty of tutorials, use search) Copy diag file to goldcard Boot to bootloader (volume down and power) Wait You may get an error, ignore it and press vol down to exit Screen will have the following message
Action => flash Vol down => diag
Press vol down for diag NOT POWER you will quickly see a screen asking you to put phone on a flat surface for TP calibration ... do it Once that is done, you will see a menu about clear S58 data. Ignore it as you need xtc clip for that, and the repair is already done. Simply pull the battery and reboot
Warning!!! Tested by myself on 3 (three) phones running pure stock. Not been tested with custom roms or any other modification. Doing this will also do a full factory reset on the phone.
During Calibration, hold phone upright for 5mins. This aligns everything. (after fitting in sensation/wildifre S and other non responsive touchpads, the above process is a necessary)
|
Quick product search
My shopping cart
Members login
Remind me my username and password...
|
Positive SSL
|