Product categories
Computer, Notebook, PC, PDA
Apple (Parts + Accesories)
Batteries
Bluetooth devices, GPS, Drones
Cables Universal
Handsfree headset
Hardware Service Tools
Air Compresser
Antistatic products
CONSUMABLES
Desoldering Station
Glass Rework Remover Station
Hot air rework stations
Infrared BGA SMD rework station
Lamp, Oven UV (UV, UV-c) Sterilizer
Microscope, Magnifier Lamp
Oscilloscope/Spectrum Analyzer
Oven
Power Supply DC
Service manual books
Signal Generator RF Frequency
Software Tools
Soldering station
Tempered Glass Machine
Tester Volt Curent
Tools Hardware
Cleaning Materials
Cutter Pliers, Tweezer
Rewark Station (BGA) Products
Rework Station spare parts
Screwdriver
SIM Tools
Solder Flux UV Paste Liquid
Tape Protective
Tool Open & Close Devices
Touch Bubble Remove Machine
Lot products no category
Memory Cards, Flash Stick
Mobile phone Cases
Mobile phone charger
Mobile Phones, Sim card, Dummy
Security System
Spare repair Parts Mobile Phones, Smartphone, SmartWatch
Tablet
Telecomunication
ULTRASONIC Cleaner, Liquid
Home devices
|
|
Lead Free Solder Paste 50g
Click image to zoom
|
ITEM: | FLUX-PASTE LEAD FREE (50g) W002-9002 |
CODE: | 3200166 |
19,27€+VAT 23,89€
Last modified on 15/12/2015
|
The product is paste-like, the colour silver-grey. Recommended soldering temperature: 217°C Content: 50g, is enough for approx. 30.000 soldering points Storage stability: approx. 5-6 months, recommended for storage in the refrigerator. (0-10°C). For lab samples, small series, model-making, for a comfortable and professional processing of SMD-comonents with the help of hot air irons, hot plate, solder iron. Stored in a practical plastic case/syringe, garantees therefore a clean and pricise processing. The Solder Paste can be used directly from the cartridge, no mixing is required. Especially helpful by very dense placement. Easy processing with regulated hot air soldering iron or electronic soldering iron - apply the dosed paste on the solder point, place the component, heat the solder point, and the SMD-solder surface is ready as well as the SMD-circuit. The solder paste can also be used for SMD-Rework applications as new contact layer, so that you can achieve high-quality soldering surfaces. The soldering paste (or: paste solder) is a supply material like wire solder, colophony and belongs to every solder surface.
Metal components Sn 96,5 / Ag 3,0 / Cu 0,5 Solder constituent parts/particle size 25-36µm Melting point 217°C Proportion of flux
Metal components |
Sn 96,5 / Ag 3,0 / Cu 0,5
|
Solder constituent parts/particle size
|
25-36µm
|
Melting point
|
217°C
|
Proportion of flux
|
10,5 - 12,5 %
|
Copper |
none
|
Halogen content |
none
|
Insulation resistance |
1 x 1012 Ohm |
Utilisation time |
24 hours
|
Flow rate |
90 |
The product is paste-like, the colour silver-grey. Recommended soldering temperature: 217°C
Content: 50g, is enough for approx. 30.000 soldering points Storage stability: approx. 5-6 months, recommended for storage in the refrigerator. (0-10°C).
10,5 - 12,5 % Copper none Halogen content none Insulation resistance 1 x 1012 Ohm Utilisation time 24 hours Flow rate 90
|
Quick product search
My shopping cart
Members login
Remind me my username and password...
|
Positive SSL
|