Product categories
Computer, Notebook, PC, PDA
Apple (Parts + Accesories)
Batteries
Bluetooth devices, GPS, Drones
Cables Universal
Handsfree headset
Hardware Service Tools
Air Compresser
Antistatic products
CONSUMABLES
Desoldering Station
Glass Rework Remover Station
Hot air rework stations
Infrared BGA SMD rework station
Lamp, Oven UV (UV, UV-c) Sterilizer
Microscope, Magnifier Lamp
Oscilloscope/Spectrum Analyzer
Oven
Power Supply DC
Service manual books
Signal Generator RF Frequency
Software Tools
Soldering station
Tempered Glass Machine
Tester Volt Curent
Tools Hardware
Cleaning Materials
Cutter Pliers, Tweezer
Rewark Station (BGA) Products
Rework Station spare parts
Screwdriver
SIM Tools
Solder Flux UV Paste Liquid
Tape Protective
Tool Open & Close Devices
Touch Bubble Remove Machine
Lot products no category
Memory Cards, Flash Stick
Mobile phone Cases
Mobile phone charger
Mobile Phones, Sim card, Dummy
Security System
Spare repair Parts Mobile Phones, Smartphone, SmartWatch
Tablet
Telecomunication
ULTRASONIC Cleaner, Liquid
Home devices
|
|
Stronger New T-7000 Glue 50ml Black Zhanlida Super Adhesive Cell Phone Touch Screen
Click image to zoom
|
ITEM: | TOOL-GLUE T7000 50ml TOUCH SCREEN ADHEVISE |
CODE: | 3200323 |
EAN: | 6971695581096 |
Weight (in kgr): | 0,050 |
Packaging: | BULK |
Dimensions (in cm): | 10 x 06 x 02 |
4,76€+VAT 5,90€
Last modified on 24/3/2024
|
Stronger New T-7000 Glue 50ml Zhanlida Black Super Adhesive Cell Phone Touch Screen Repair Frame Sealant Diy Craft Jewelry Tools. Specifications: Glue Color: Black Appearance: transparent semi Floating Body Solid Content: 33%-38% Surface Drying Time: 3 minutes Completely Cure Time: 24-48 hours Save: at degrees to 28degrees of preservation Weight: 60g Attention: 1. Keep away from ignition sources when use. 2. Please put this item in well-ventilated environment. 3. Please keep it in the palace where children can’t reach. 4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes
The reliable Zhanlida T-7000 glue is effectively used for gluing various parts. Its technical parameters have made it popular and often used in the field of electronics. This multipurpose compound can be used for gluing metal, glass, plastic and wooden materials, as well as electrical components and other items.
Review of Zhanlida T-7000 glue 50ml
Glue-sealant for gluing T7000 is widely used for the restoration of electronic gadgets.
This glue is offered in thick polyethylene tubes of different sizes and has such characteristics that make it almost universal.
The tube is equipped with a thin metal tip, which makes it possible to conveniently apply the composition to different surfaces, regulating its required quantity.
The T7000 is considered practical and convenient to use, as it becomes ductile when heated to a temperature of 80-100 ° C. Previously glued materials can be freed from soft glue, if necessary.
This feature allows the use of T-7000 glue to replace broken lids or glasses during the repair of many mobile phones.
Step-by-step instruction on the use of T-7000 glue
Adhesive is easy to use and is used according to the following scheme, which is suggested in the instructions to the composition:
Glued surfaces of a gadget or other object must be previously cleaned of dust and old glue. After the surfaces are cleaned, they are degreased. It is necessary to allow the surfaces to dry out. When the surfaces are completely dry, you can start applying the adhesive to the necessary layer. If you need to attach a touchscreen, then do not immediately connect it to the surface of the smartphone. You need to wait a few minutes for the glue to freeze. After the glue becomes more viscous, you need to connect the touch panel to the frame. Then it is necessary to press the surfaces together. This method avoids the flow of glue between the screen and the touchscreen to prevent the formation of streaks. Bonded surfaces that have been joined together, should be pressed and left for a while (about a day) in this position until completely dry. Despite the fact that the final drying will occur in twenty-four hours, it is worth starting to use the glued product in forty-eight hours, so that the result is more reliable. If in the process of gluing materials there are excess glues, then removing them will be very easy by rolling. It is enough to hold a non-sharp object or a finger in places where the composition has gone beyond the boundaries of the working surfaces, so that the glue begins to gather in lumps. From the slots it is easily removed with a needle
|
Quick product search
My shopping cart
Members login
Remind me my username and password...
|
Positive SSL
|