Product categories
Computer, Notebook, PC, PDA
Apple (Parts + Accesories)
Batteries
Bluetooth devices, GPS, Drones
Cables Universal
Handsfree headset
Hardware Service Tools
Air Compresser
Antistatic products
CONSUMABLES
Desoldering Station
Glass Rework Remover Station
Hot air rework stations
Infrared BGA SMD rework station
Lamp, Oven UV (UV, UV-c) Sterilizer
Microscope, Magnifier Lamp
Oscilloscope/Spectrum Analyzer
Oven
Power Supply DC
Service manual books
Signal Generator RF Frequency
Software Tools
Soldering station
Tempered Glass Machine
Tester Volt Curent
Tools Hardware
Touch Bubble Remove Machine
Lot products no category
Memory Cards, Flash Stick
Mobile phone Cases
Mobile phone charger
Mobile Phones, Sim card, Dummy
Security System
Spare repair Parts Mobile Phones, Smartphone, SmartWatch
Tablet
Telecomunication
ULTRASONIC Cleaner, Liquid
Home devices
|
|
Battery tester charger
Click image to zoom
|
ITEM: | BAT-TESTER BATTERY CHARGER ANALYZER D100 |
CODE: | cod0017567 |
Weight (in kgr): | 0,300 |
Packaging: | BOX(OVP) |
Dimensions (in cm): | 20 x 20 x 10 |
160,48€+VAT 199,00€
Last modified on 12/10/2020
|
The D100, is adapted to a full range of chemistries (LiPo, LiFe, LiIon, NiMH, NiCd and PB) and comes with a comprehensive set of leads making it fully-prepared for practically any battery type. This charger is specially designed to cater for the higher end user, but with the aid of a simple-to-use interface and a complete set of instructions, this charger is by no means limited to experts. This charger features: ► Two independent charging circuits (dual 2x100W output on DC (or with power supply) and 100W can be distributed across 2 channels on AC) ► Terminal voltage control ► Re-Peak mode for NiMH/NiCD batteries ► Battery meter ► Battery internal resistance meter ► PC communications This chargers comes with two XH balance boards, XT60 with crocodile clips, two XT60 charge leads, two deans charge leads, and an AC power cord with crocodile clips for DC. The D100 has been created with automated safety precautions, including a charging current limit, capacity limit, temperature threshold and processing time limit. This charger is also compatible with both iOS and Android smart phones via a Wi-Fi Module (sold separately), making operation easier than ever. Specifications: Input voltage: AC 100-240V / DC 11-18V Charging circuit: AC Input 100W / DC Input 2x100W Discharge circuit: 2x10W Charging current: 0.1-10A discharge current: 0.1-5A Balancing Leakage Current Port: Max 200mAh / cell Slow Charging current: 20mA-300mA & OFF LiPo / LiFe / LiIon / LiHV batteries: 1-6 pcs. NiMH / NiCd batteries: 1-15 pcs. Voltage Battery Lead (PB): 2-20V Dimensions: 163x153x72mm Weight: 975g
|
Quick product search
My shopping cart
Members login
Remind me my username and password...
|
Positive SSL
|