Product categories
Computer, Notebook, PC, PDA
Apple (Parts + Accesories)
Batteries
Bluetooth devices, GPS, Drones
Cables Universal
Handsfree headset
Hardware Service Tools
Air Compresser
Antistatic products
CONSUMABLES
Desoldering Station
Glass Rework Remover Station
Touch Mould Digitizer Base Parts
Touch Remover Toll
Hot air rework stations
Infrared BGA SMD rework station
Lamp, Oven UV (UV, UV-c) Sterilizer
Microscope, Magnifier Lamp
Oscilloscope/Spectrum Analyzer
Oven
Power Supply DC
Service manual books
Signal Generator RF Frequency
Software Tools
Soldering station
Tempered Glass Machine
Tester Volt Curent
Tools Hardware
Touch Bubble Remove Machine
Lot products no category
Memory Cards, Flash Stick
Mobile phone Cases
Mobile phone charger
Mobile Phones, Sim card, Dummy
Security System
Spare repair Parts Mobile Phones, Smartphone, SmartWatch
Tablet
Telecomunication
ULTRASONIC Cleaner, Liquid
Home devices
|
|
Glass separator machine BST-650A until 10 inch devices
Click image to zoom
|
ITEM: | TOOL-TOUCH GLASS SEPARATOR BST-650A UNTIL 10 inch |
CODE: | cod0022883 |
Weight (in kgr): | 5,000 |
Packaging: | BOX(OVP) |
Dimensions (in cm): | 30 x 20 x 10 |
338,63€+VAT 419,90€
Last modified on 4/10/2020
|
Product Description This machine is used for apple and Samsung HTC domestic touch screen, split screen assembly, now a lot of mobile phones (including apple, Samsung) touch screencracked or broken, the cost of repairing is very high, they generally required depot repair. Or need to purchase the equipment, complete set is very expensive including machine, SMT machine, laminating machine and defoaming machine. This store waterglue laminating process, without equipment, do not need space, suitable for ordinary repair shop. Low cost. Replace the glass cover plate or a touch screen cost just a few dollars, for good and not much difference. Function: 1. multifunction vacuum separator 2. Built-in vacuum pump, UV lights. 3. With iron, maintenance lamp. 4. Supports up to 10-inch mobile tablet Ipad Application: Used to divide, repair cell phone screen, LED display Component heating work, SMD reengineering work,PCB removing,soldering work Warning: 1. The table should be in tidy and the material must be heatproof 2. When it’s working, should be careful to keep away from getting burned 3. Pay attention to the heating element, high temperature will damage it. 4. Do not use heating plate near the combustible and flammable objects. 5. Do not move or touch the machine until it’s power off and cooling down . 6. This machine is high temperature electronic product. In case of any accident happen, remember to cut off the power while not use it. 7. Do not use the machine in high temperature (up to 300 degree) for a long time. Usually, no more than 8h. Note: 1. Must ensure the machine connects ground wire 2. Do not let air flow blows on the plate directly, or it will affect the heating machine
|
Quick product search
My shopping cart
Members login
Remind me my username and password...
|
Positive SSL
|