Product categories
Computer, Notebook, PC, PDA
Apple (Parts + Accesories)
Batteries
Bluetooth devices, GPS, Drones
Cables Universal
Handsfree headset
Hardware Service Tools
Air Compresser
Antistatic products
CONSUMABLES
Desoldering Station
Glass Rework Remover Station
Hot air rework stations
Infrared BGA SMD rework station
Lamp, Oven UV (UV, UV-c) Sterilizer
Microscope, Magnifier Lamp
Oscilloscope/Spectrum Analyzer
Oven
Power Supply DC
Service manual books
Signal Generator RF Frequency
Software Tools
Soldering station
Tempered Glass Machine
Tester Volt Curent
Tools Hardware
Touch Bubble Remove Machine
Lot products no category
Memory Cards, Flash Stick
Mobile phone Cases
Mobile phone charger
Mobile Phones, Sim card, Dummy
Security System
Spare repair Parts Mobile Phones, Smartphone, SmartWatch
Tablet
Telecomunication
ULTRASONIC Cleaner, Liquid
Home devices
|
|
Welding machine BGA ZM-R255 Reballing oven
Click image to zoom
|
ITEM: | TOOL-BGA WELDING MACHINE ZM-R255 REBALLING OVEN |
CODE: | cod0022744 |
Weight (in kgr): | 4,000 |
Packaging: | BOX(OVP) |
Dimensions (in cm): | 40 x 30 x 30 |
442,74€+VAT 549,00€
Last modified on 13/11/2020
|
Welding BGA Machine Reballing Oven. Instruction A. Features Main performance: 1. Similar to reflow oven, fully meet the requirements of ISO-9000. 2. Micro computer control, easy to operate on the platform. 3. Multi-safety protection. Main specifications: Heating area: 120MM 200MM Power consumption: 600W Power supply: AC220V Dimension: 310MM 280MM 145MM(L W H) Weight: About 7.7Kg 1. Why do we use auto tuning device We choose PID process control in most occasions while temperature control is highly required. There are different parameters for different temperature control objects, such as proportional band, differential time, and integral time. Traditional PID devices, the above functions are set by experienced experts, so the parameters are very likely to mismatched, consequently the whole system is easily go beyond control. It brings many troubles to our customers. But for this series of device, it hasn’t had these troubles, because it carries auto tuning function. While start the function, it will analogue experts to operate, make it attain perfect effect. 2. How to use auto tuning (1). Press SET to enter into the second setting area, and then enter into auto tune setting situation according to the operation processes. Press SET for 5 seconds after set" AT "as "01", then the device will logout from setting situation and enter into auto tuning condition, and here the AT lamp flashes. It will auto tuned after controlling for three cycles (time are different in terms of lengths), then "AT" indicator lamp goes off and the PID parameters will saved automatically. (2). You can go over in the second setting area if you want to check PID parameters. (3). The power supply should be work well and should reduce interferences as much as possible while in the process of auto tuning; otherwise it will need to start again. (4). Parameters may different between start the auto tuning at the beginning and at the controlling point, but generally the second parameters are preferred. (5) Reset repeatedly to check these parameters after auto tuning in great interference occasions, then choose to revise.
|
Quick product search
My shopping cart
Members login
Remind me my username and password...
|
Positive SSL
|