GSM Paging System

Telephone line emulator
PSTN line management
BELL103 / V.21 modem simulation
Programmable through rs232

New SIM800 is a complete Quad-band GSM/GPRS solution in a SMT type which can be embedded in the customer applications. The SIM800 support Quad-band 850/900/1800/1900MHz, it can transmit Voice, SMS and data information with low power consumption. With tiny size of 24*24*3mm, it can fit into slim and compact demands of customer design. Featuring Bluetooth and Embedded AT, it allows total cost savings and fast time-to-market for customer applications.

Presents an ultra compact and reliable wireless module-SIM900. This is a complete Quad-band GSM/GPRS module in a SMT type and designed with a very powerful single-chip processor integrating AMR926EJ-S core, allowing you to benefit from small dimensions and cost-effective solutions. Featuring an industry-standard interface, the SIM900 delivers GSM/GPRS 850/900/1800/1900MHz performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption. With a tiny configuration of 24mm x 24mm x 3 mm, SIM900 can fit almost all the space requirements in your M2M applications, especially for slim and compact demands of design.

The GMC (GSM Multi Control) is a remote control, paging and automation system via the GSM network. The GMC has a total of 13 ports (inputs / outputs). Of these, the first 6 are inputs and the other 7 exits. Port operation can be changed. All ports can be input, while some can be analog inputs or thermocouple inputs. Also two of these can be microphone input and output for headphone or amplifier. It can easily be configured to work like: mobile remote control, alarm, temperature control, pump station remote control, automatic hands-free communication system, announcement system. And of course, due to the many inputs it has, we can combine all of the above functions into a device. All of the above functions are implemented by enabling all or some of the following features we have through GMC. Set up to 4 phone numbers that can control the system.
Send SMS to unzip its exits.
Call when an entry is triggered.
Connect a thermocouple and set the acceptable temperature limits
Connect any other sensor that has an analog output and set the acceptable voltage limits.
Send a full SMS report for the status of all entries and exits when an entry is triggered.
Define what events each of the 4 phones will receive.
Request at any time, via SMS or unanswered call, a report on the status of costs and entries.
We arm and disarm it with a missed call or activation of one of its entrances.
Receive SMS arming / disarming confirmation.
Connect a siren and set a number of its operating cycles.
Specify the maximum number of SMS reports to be sent.
Connect a microphone or speakerphone

The GSM Gate Opener RTU5025 is a very simple device which can be used for authorized door access, controlling gates, switching of remote equipments, car parking systems. Actually the GSM Gate Opener RTU5025 can be used in places which require to turn ON/OFF your system, machines, equipments remotely with a FREE call from your mobile phone.
Just dial from Authorized User number then the Barrier and doors are opened, or the machine are turn on or off by the GSM Gate Opener. There are no call costs, the GSM Gate Opener rejects the call from authorized number then carrys out the turn ON/OFF action. Mainly Features of the GSM Gate Opener:
1. No call charges. the GSM Gate Opener rejects the call from authorized number then carrys out the turn ON/OFF action on the first 'ring';
2. Multiple applications. (gates, bollards, barriers, garage doors, shutters and access doors or machines);
3. Secure - Using caller ID for identification,unknown callers are ignored;
4. Can be operated from anywhere, no distance limit;
5. Add or remove users by SMS Text command;
6. No need to provide a remote control for different users;
7. Up to 64 authorized phone numbers can be configured;
8. Two Digital inputs for door sensor, motion sensors or other sensors to protect your door and windows, when any one of them triggered, will send SMS alert message you immediately;
9. One output with relay rating 3A/240VAC for connecting the switch of the door or machines;
10. The relay action will return a SMS confirmation to the owner, this function is editable by user;
11. Based on GSM Network, applied to many applications.
Setting by PC software.(WindowsXP, Win7, Win8)

IRIDA DREAM GSM Remote control Paging system
Module Quad Band GSM
Firmware upgradeable

The new GSM communicator ATOM provides a simple yet effective solution to all of your security equipment notification needs.Once triggered the GSM communicator automatically makes call &sends a text message to phone numbers stored in it,providing a fast and reliable warning,ensuring total peace of mind.The GSM Communicator can be connected to any device which provides NO/NC volt free alarm signals such as intrusion alarms,fire alarm,DVR,fridges,etc.The device can also be used as SMS Alert Security device by connecting it to a door using a sensor. Features • Single Zone
• Zone Open/Close Alert
• SMS/Call Alert
• Store 4 user & 1 Admin Number
• Control through Mobile-SMS/Android App. Variable use We have designed the device to be flexible so it can be adapted to customer requirements. Small Dimensions Atom is an Compact Sized Device with Dimensions (mm) HxWxL= 85x20x70 Easy Installation Simply connect the Device to an Door Using a Door Sensor,Or Connect the Device to Intrusion/Fire alarm Relay,You can Connect it to any device which provides NO/NC volt free alarm signal. Communication and Control The Device Sends SMS and Makes Call using the GSM frequency ,the Control of the device can be done through Mobile SMS or Android App.(App Works on SMS)

Informer has 8 Inputs, you can connect No/NC output (Voltage free) of any device to the inputs of informer, when the No/Nc output provides volt free alarm signal it triggers the informer, then the informer will send SMS/Call to stored user phone numbers. Few application areas of Active Informer • Danger limit exceed alert for Industries(Machines)
• Panic SMS Alert for unsafe areas Unauthorized motion Alert ,Shop Open Alert.
• Door open Alert Through SMS
• Phone Alert System for Burglar Alarm System
• Phone Alert for CCTV DVRs.
• Phone Alert for Power Fence.
• Temperature monitoring system.
• Power Outage Indication.
• Power Generator. Status indication.
• SMS Alert for Sensors notifications Features:
• 8 Potential Free Input
• SMS & Call Alert.
• Compact size.
• 1 Admin & 4 users Phone number.

The Irida GPRS is a stand-alone GSM remote control. The product has 4 independent outputs for activation or deactivation (with or without time delay) devices. It also has four analog inputs for connection to temperature sensors, pressure, humidity, etc., Or any other system which provides indications via analog outputs. (Different analog inputs can be used as additional digital inputs). It also has 4 digital inputs for connecting devices with N.O. - N.C. outputs or signals from alarm or directly from natural gas systems, motion detection or fire etc. General technical characteristics:
VOLTAGE 12 - 24 VDC
AVERAGE CONSUMPTION IN PEACE 40 MA
CONSUMPTION OF EMISSION 80 MA
PROGRAMMING PORT RS232
Four output relays 1A / 24VDC
4 DIGITAL INPUTS
4 ANALOG INPUTS
MODULE QUAD BAND GSM / GPRS
DIMENSIONS 100X120X22 MM
INDUSTRIAL BOX TRACK
TECHNOLOGY SMD
CERTIFICATE CE safety COMPLIANCE
GREEK PRODUCT

Module IRIS Telit 862 Dual Band CE, ROHS

GSM alarm control unit 2 inputs.
Positive or negative activation command.
Notification to 5 phones with 2 different messages.
Different SMS confirmation on the status of inputs.
It features an outdoor antenna with cable 2m.
An inlet for connection to an alarm system to send signals to ARCs and handling via DTMF alarm.

The GSM 41-C is a bidirectional telephone receiver compatible with all alarm centers. It is activated by a contact no. (Normally open) or n. (Normally closed). Allows you to store an alarm message for up to 30 seconds and to call 6 different phone numbers. It also integrates other features of great utility such as sending sms messages.
Technical features:
° One-way bidirectional telephone communicator with industrial MODULE
900/1800/1900
A programmable alarm channel N.A. / N.C. Active on transition.
° Six telephone numbers for 16-digit alarm call ??
° Four telephone numbers for remote control function.
• Three phone numbers for SIM matricion up to 16 digits.
° A Voicemail max 30 ?? Freely programmable.
° Possibility to listen to the recorded voice message through the loudspeaker
° Message sending option: voice and / or SMS.
° Alarm SMS message selectable from a list of 10 presets.
• SIM maturity notice with pre-defined SMS message.
° Allows you to interrupt / exclude all ongoing calls.
° An open status collector output.
° Date and time management.
° Checking when SIM is switched on and working properly.
• System vitality reporting.
° Block or programming command input.
° Setting call cycles.
° Setting the repeat number of messages.
° Reporting the field value.
° Network Reporting.
° Watch-Dog Circuit of Super Vision of Microprocessing Operation
° Display of memory contents: telephone numbers, cycles
Message repetition etc ..
° Buzzer signal remoting connector.
° External GSM antenna.
° Standard battery pack for date and time.
° Protector against the opening of the cover.