Fixed cellular terminal GSM

The main application is: Connecting the RJ-11 FXS line to connect Ordinary telephone
set for voice call, to connect PBX for call extentions, to connect billing systems for public
phone use, to connect VoIP gateway to realize VoIP call termination, to connect alarm
system for security purpose, etc. It is not a VOIP gateway, nor a GSM+VOIP gateway, It is
a GSM Fixed Wireless Terminal that produces a Analog FXS phone line.
Air interface standard: GSM850/1900Mhz,900/1,800Mhz phase 2+ full band
Frequency ranges:
A) GSM 850 GSM 1900:
I) Transmission: 869.2 ~ 893.8MHz I) Transmission: 1, 930 ~ 1, 990MHz
Ii) Reception: 824.2 ~ 848.2MHz Ii) Reception: 1, 850 ~ 1, 910MHz
B) GSM 900: GSM 1800:
I) Transmission: 890 ~ 915MHz I) Transmission: 1, 710 ~ 1, 785MHz
GSM BOSSGSM15 User's Manual Version 1.1
4
Ii) Reception: 935 ~ 960MHz Ii) Reception: 1, 805 ~ 1, 880MHz
Phone interface: supply RJ-11 Phone Interface
Hanging voltage: 45V
Picking off voltage: 30mA / 41mA
Dialing tone Frequency: 450Hz
Antenna interface: Antenna amplifying>2.5db
Sensitivity:<-104DBM
Transmitting power<3W
Color: White /Black (optional)
AC-Adapter interface: Input: AC 110~240VAC 50~60Hz
Output: 12DC 1A.
AC-Adapter type: EU,US,AU,British can be optional
Available:
GSM 900/1800Mhz dual band, employing Wavecom Q2303A, Q2403A,Q2406A, P3203A,
Sim300W ,SIM500W module to make;
GSM 900/1800/1900Mhz Tri-band, employing Sim300z module to make;\
GSM850/900/1800/1900Mhz Quadband, employing M10,SIM340Z module to make.
Material ABS (Acrylonitrile Butadiene Styrene)
Dimension 170mm×118mm×30mm Excluding antenna
Weight 400g Weight of Main unit
Power Switch Rocker switch
Power Socket 12V DC input
Phone interface RJ11 2 RJ-11 ports
Antenna interface SMA-female
LED display
No.1: Power, No.2.in use, No.3, in talk, No.4,
Battery, if have, No. 5-7, Signal strength
From left to right(front
side view)
Front side
LEDs display for Signal strength, Power, Working
Status,Talking and Battery indicator;
Rear side
1pcs SMA antenna connectors, 2 RJ-11
output,Power port and switch;
Bottom side
1pcs Sim card holder slots, you can insert Sim
card into the slot .

Digital fixed cellurar ternimal Tri-band, GSM 900/1800/1900MHz, you can connect any PSTN internal or PBX system to works like simple line.
Requires an external common phone linked to the machine
Supports VoIP, PBAX, GSM and PSTN

1. Convert phone call from fixed line to4GLTE Network via VoLTE and optional3GNetwork
2. 1x RJ-11 phone ports for connecting phone, PABX
3. 1x RJ-11 phone jack for connecting PSTN Fixed Line.
4. External Antenna connector – SMA Type
5. back-up LI battery (INTERNAL)
6. Volume adjustment and echo cancel
7. Support caller ID: DTMF Mode; optional FSK Caller ID
8. Reverse Polarity or 12/16KHz metering signal
9. USB port to connect PC for4GData network
10. Support SIM Lock and Network Lock Technical specifications
4G/3G parameters
Support4GLTE 1800+2600MHz, etc.;3GHSDPA/UMTS 2100/900MHz
4GLTE Cat.4 Downlink : 150Mbps
Power supply
AC input voltage 100V~240V AC
Power adaptor output DC 12V~9V/1.5A~1A
Battery 1000mah Li-thium battery
Maximum charging current 600MA
DC input voltage range 9V~12V DC
Maximum working current 700ma(DC7.5V, Average current, excluding charger current)
Application environment
Operating temperature: 0~+75゜C
Relative humidity: 10%~90%
Device dimension : 12x12x3.5cm

Small size    Simple wall mounting.    GSM-GPRS cellular network, 900/1800 MHz, free use for any operator.    2 connection ports. Connectivity to PABX switchboard.    Incoming and outgoing caller ID, DTMF / FSK compatible.    Polarity inversion protection. CONTAINS: • Fixed-mobile telephone link • Feeder-charger • 4m cable antenna • Telephone cable
Main Features:
 
- Small size
- GSM and GPRS cellular network, 900/1800 MHz
- PABX connectivity
- DTMF / FSK caller ID
- Polarity inversion protection
- Micro USB data port
- Rechargeable lithium battery
- Easy battery removal. External access in the box
- 3 hours of conversation when outside the power supply network
- SMA antenna connector for external antenna
- Approved
- Dimensions: 124 x 124 x 38 mm.
- Weight: 255 gr.

SAGEM RL300 Fixed GSM Gateway with Voice and SMS service - Ref The RL300 of Sagem is a mobile device (FCT) which is connected to telephone or Pbx (as a GSM gateway) or by phone in the elevator and make all calls via GSM. To function, it is necessary a SIM card. It gives us communication solutions for points that are not land lines.
Compatible with all mobile networks COSMOTE, WIND & VODAFONE (GSM 900 / 1800MHz) with Caller ID.
If we have frequent communication with mobile phones and want to avoid the radiation.
Ideal for routing calls to mobile in pbx.
It can be connected to a pbx to route calls to mobile (GSM gateway) to reduce the cost of calls to mobile phones, especially when we have company mobile phones.
It can also be connected to simple phone to operate as a stable mobile device in areas with weak signal.
If the use of simple apparatus is necessary (use by young children and elderly at home), then this device gives the solution.

Convenient GSM gateway SAGEM RL302, Wireless Voice Box SAGEM RL302 is a convenient GSM gateway used to connect phone to access GSM network plugging your phone on the device will allow you to: -send and receive voice calls, -send and receive SMS* -Interrogate your voice mail Sagem XS200/MO300 Industry GSM module
Digital Antenna inside
Support voice and SMS
Support CLIP
Visualization and voice DTMF dial
Support AMR, EFR, FR and HR codec
Call waiting
Multi partite talking GSM Frequency
-TDMA 850/ PCS 1900
-EGSM 900/ DCS 1800
Support 3V SIM card Power Supply
DC 6V/1A
AC 100- 240 V. 50-60 Hz Dimensions: L139 *W95* H30mm
Weight: 200g The box contains: -rl302 device, -external power supply, Quick installation guide, Your phone and all networks must support the SMS feature

Technical characteristics Type of product Fixed cellular terminal
Width 122 mm
Depth 42 mm
Height 138 mm
Case color Black
Technology GSM / DECT Gang GSM 900/1800 (Double bands)
Service provider Unspecified
Bluetooth Profiles Generic Access Profile (GAP)
Phone functions teleconference
Connector type RJ-11
Accessories included Power adapte

FCT GSM DUAL BAND ML-1103 device for alarm communication. Compatible with all alarm centers and all mobile networks       PSTN backup mode
      LED display with signal level indicator
      Power supply 5-13.8V DC
      Consumption 25mA on hold and 400mA on call
      It has an outdoor antenna with a 2m cable Detailed Selling Lead Description
Features:
1) Simple to install and easy to maintain
2) Steady module and reliable design ensures good performance
3) Provides optimized circuit directly connecting the exchange device for extensions
4) Compatible to most telephones, PBX and VoIP gateways (for call termination)
5) Strong signals with high gain antenna
6) Attractive plastic casing
7) SIM card supported (3V, 5V)
8) Caller ID display
9) Provides reversal polarity signal for metering
10) No noise and clear voice
11) Suitable for wide voltage range and low power consumption
12) Suitable for all kinds of weather and environment
13) RJ-11 ports (two extensions:Line / phone and line (optional))
14) Locking PIN / network (optional) Specifications:
1) Air interface standard:GSM 900 / 1800MHz phase 2+
2) Frequency ranges:
A) GSM 900:
I) Transmission:890 ~ 915MHz
Ii) Reception:935 ~ 960MHz
B) GSM 1800:
I) Transmission:1, 710 ~ 1, 785MHz
Certificate CE
Internal rechargeable battery. Standby time: 48 hours. Duration in conversation: 2-6 hours. Recharge time: 6 hours.

The Witura's WT-1010C2 GSM is a back-up alarm system that can be connected to any alarm. If the fixed telephone is cut by an attacker or a malfunction, the GSM and communication dialer will determine the line cut and send an alarm signal to the police, homeowner or signal reception center.
This GSM communication is used in Banking, ATMs, jewelery shops, homes, shops and where double protection is required on your property.
It has automatic control and reboot function. It can continuously monitor the system status and when there is a problem with the SIM card or the backup of the alarm and it does not work properly, the system will automatically restart.
The design of the WT-1010 features 3 relay outputs to achieve remote control. For example, you can use it to turn on / off lighting, air conditioning, remote refrigerator with SMS.
Automatic dialing to 8 phone numbers. The GSM dialer will also send SMS to 8 programmable mobile numbers to alert the user that the PSTN line has been cut off or not available.
Low power consumption. The GSM module uses 30mA in idle state and 260mA when transmitting an alarm
Available for 850/900/1800 / 1900MHz Frequency Band GSM ALARM for: Boat
Caravan
Container
Photovoltaic parks etc.
It is the ideal solution for your office communications needs. It provides your company with an economical and flexible solution allowing the use of an existing GSM network. And it is particularly useful in areas where there is no traditional telephony reception (OTE). This advanced, high-performance and high-end terminal supports the latest communication standards, as well as connectivity with call centers for lower communication costs, since it converts calls from fixed to mobile to mobile to mobile calls. : Compatibility with all Central Security Systems and Transmission at Signal Receiver.gsm works when the telephone line is cut
Ability to operate on all Mobile Networks operating in Greece.
PSTN Backup Mode.
In case of interruption of the OTE telephone line, calls are automatically made via Mobile Telephony.
It checks the correct operation of the SIM card and the signal levels of the mobile telephony.
Sending of text messages in case of interruption of OTE, PPC.
Ability to arrest and disarm the system as well as trigger costs
with SMS or application on android kai iphone.
Three digital inputs: Send messages when you activate the inputs or call the registered numbers or send a signal to the Signal Receiver.
Three digital outputs: It has three outputs, a 300mA open collector type and a relay power supply.
This way we can turn on and off various remote devices.
Can be connected to extra relay board 30A (VS-06).
It can accept up to 100 users.
It has a rechargeable battery to operate even with power failure.
It also has a screen for system settings and information, and has an LED for power and signal control.
It has an antenna with 3 meters cable.
Very low power consumption requires 30mA on hold and 260mA in call status.
Ease of placement on wall and / or table. It is a system of integrated and modern communication between the alarm and the Signal Receiver Center (ARC). So far, the communication between the alarm and the CLS is via terrestrial telephone line using the 4 + 2 (previously) protocol, Contact ID and SIA . With this method the ACS is only updated in the following cases: When arming-disarming the system. From a possible violation that may arise. From a 24-hour test set by the technician. The resulting problem is that when the connection of the telephone line is interrupted, the ACS is also stopped. A solution to this problem is the use of GSM gateways.

Aplication: GSM 500 Data is the evolution of the GSM500 universal gateway delivering voice and transparent data transmission via GPRS with only one SIM

System reliability: High transmission speed
Wide power supply range from 10 to 17 Vdc
Industrial dual-band module Technical data:
Comes with antenna extension L = 2 m
PSTN-line cost reduction
Low consumption
4 Leds signalling: device operation status, GSM signal strength, line status and/or data transmission and power supply status
Automatic reboot under prolonged GSM signal absence
Roaming management feature
Data transmission through DB-9 connector
Easy installation by connectors and/or termianl blocks
Remote management of expiring credit and battery alarms via SMS
Remote control of credit status, battery status and GSM signal level via SMS
Remote reboot
Remote programming via SMS. Technical:
GSM field strength signaling LED
Device status signaling LED
Line status / data transmission status LED (GSM500.net)
Power status indicator LED
Quad Band GSM module (all GSM500 versions)
Transmission power 2 W
Input for 12 Vdc power supply
Input for external 230 Vac adapter
DB-9 female connector (GSM500.net)
Relay output (R2R version)
External antenna (cable L = 2 m)
External adapter (input 230 Vac 50 Hz; output 12 Vdc 500 mA; CE mark; versions GC, R2R, .net). Supplied with 2m magnetic base antenna, telephone type connection cable (2m), internal backup batteries, external power supply and DB-9 connector for data transmission in RS-232 standard. Allows voice and data transmission with a single SIM, remote control of local serial communications and telemonitoring via the COMNet system

Main Features 1. Convert phone call from fixed line to 4G LTE Network via VoLTE and optional 3G Network 2. 1x RJ-11 phone ports for connecting phone, PABX 3. 1x RJ-11 phone jack for connecting PSTN Fixed Line. 4. External Antenna connector – SMA Type 5. back-up LI battery (INTERNAL) 6. Volume adjustment and echo cancel 7. Support caller ID: DTMF Mode; optional FSK Caller ID 8. Reverse Polarity or 12/16KHz metering signal 9. USB port to connect PC for 4G Data network 10. Support SIM Lock and Network Lock

Internal inside board Module FCT 3G GSM 2N EasyRoute.
IC: 2417C-MC8795
FCC ID: N7NMC8795
QUALCOMM
CE 0168

Original travel charger 2N FCT 12V/2A Stabil

Original power charger Ericsson FCT 250, 251, 121, 151