Cable low loss GSM, Connectores

Extension Cable Tp-link 6 Mtr Antenna Tl-ant24ec12n
TP-Link TL-ANT24EC12N Extension Cable for Low Loss Antenna, 2.4GHz, 12m KMS-400, Type-N Male to Female connectors • Quick and easy installation in any suitable wireless environment
• Its 6 meters in length allow you to place the antenna in the optimal position to maximize the performance of your wireless network
• Rugged weather resistant design, compatible with most outdoor solutions
• N male to female connector, works with N type antennas TP-Link TL-ANT24EC12N
6 meter low loss antenna extension cable
What can you do if the wireless signal is too weak to connect to an access point in another building and you need to locate the antenna higher or further away for better reception? The answer is to use an antenna extension cable. It is no longer necessary to move the access point or wireless router (which can sometimes be difficult) to another location. Thanks to the low signal loss offered by the cable, you have greater flexibility in locating it at the sweet spot and thus maximizing the performance of your wireless network.
Characteristics:
• KMS-400 (LMR-400) 12 meter low loss cable
• N male to female connector
Features high performance low loss KMS-400 cable suitable for the same use as LMR®-400[1]
Weather resistant design, applicable in most outdoor solutions
N Male to Female connector, works with N type antennas

Extension Cable Tp-link 6 Mtr Antenna Tl-ant24ec6n
TP-Link TL-ANT24EC6N Extension Cable for Low Loss Antenna, 2.4GHz, 6m KMS-400, Type-N Male to Female connectors • Quick and easy installation in any suitable wireless environment
• Its 6 meters in length allow you to place the antenna in the optimal position to maximize the performance of your wireless network
• Rugged weather resistant design, compatible with most outdoor solutions
• N male to female connector, works with N type antennas TP-Link TL-ANT24EC6N
6 meter low loss antenna extension cable
What can you do if the wireless signal is too weak to connect to an access point in another building and you need to locate the antenna higher or further away for better reception? The answer is to use an antenna extension cable. It is no longer necessary to move the access point or wireless router (which can sometimes be difficult) to another location. Thanks to the low signal loss offered by the cable, you have greater flexibility in locating it at the sweet spot and thus maximizing the performance of your wireless network.
Characteristics:
• KMS-400 (LMR-400) 6 meter low loss cable
• N male to female connector
Features high performance low loss KMS-400 cable suitable for the same use as LMR®-400[1]
Weather resistant design, applicable in most outdoor solutions
N Male to Female connector, works with N type antennas LMR®-400 is made by Times Microwave. LMR® is a registered trademark of Times Microwave. Times Microwave is not affiliated with TP-LINK and does not endorse TP-LINK products.

Low loss cable RF Procom 10MFMEXLL

Construction : Inner conductor Bare copper/Copper clad steel Φ1.8 mm
Dielectric Foam /Solid PE Φ5.0±0.02 mm
Shield Bonded aluminium foil Φ5.2 mm
Outer conductor Tinned copper braid Φ5.7 mm
Shield coverage 85%
Sheath PVC/PE Φ7.5 mm Electrical & Mechanical Characteristics : Impedance 50±3 Ohm
Nominal capacitance 82 pF/m
Velocity of propagation 82%
Insulation resistance >5000 Mohm.Km
Inner conductor resistance 6.8(10.5) Ohm/Km
Outer conductor resistance 14.1 Ohm/Km
Operating temperature range -40°C - +85 °C
Min.bending radius 38 mm

Construction : Inner conductor Bare copper/Copper clad steel Φ1.8 mm
Dielectric Foam /Solid PE Φ5.0±0.02 mm
Shield Bonded aluminium foil Φ5.2 mm
Outer conductor Tinned copper braid Φ5.7 mm
Shield coverage 85%
Sheath PVC/PE Φ7.5 mm Electrical & Mechanical Characteristics : Impedance 50±3 Ohm
Nominal capacitance 82 pF/m
Velocity of propagation 82%
Insulation resistance >5000 Mohm.Km
Inner conductor resistance 6.8(10.5) Ohm/Km
Outer conductor resistance 14.1 Ohm/Km
Operating temperature range -40°C - +85 °C
Min.bending radius 38 mm

Coaxial RF cable CNT 400/RSC 400 Cable N-male N-male,1m

The COAXSMA-L is an LMR195 coaxial cable fitted with a Type N male connector on one end and an SMA connector on the other end. The cable has a UV-resistant polyethylene jacket, which with proper installation and care, is designed for 20 years of outdoor use.

Excellent quality low-loss CFD-200, LMR-195 or H155PE SMA male - SMA female cable. CFD-200, LMR-195 and H155PE are almost similar in technical aspects (check below). 50 Ohm. For even lower signal loss, please check LMR-400 cable beside.
Cable including SMA male - SMA female, CFD-200 / H155PE / SH-200 / LMR-195, super low-loss, 6mm, 10m, black.
Loss in frequency 450hz/0.23dB/m,, 900mh/0.33dB/m, 1880mz/0.47dB/m, 2100mz/0.50dB/m, 2600mz/0.57dB/m.
Diameter 5 mm

H155 PE is a low-loss 50 ohm coaxial cable, a low loss cable with low transmission loss. The H155 PE cable is pre-assembled with
N plug to SMA plug
Cable length 2 m
Each cable is individually checked electrically. The electrical data of the H155 PE are identical to H155 PVC and H155 FRNC or H155 LSNH. The only differences are in the material of the outer jacket.
All H155 cable types are UV resistant.
A PE jacket is also resistant to most oils, alkalis and acids. FRNC or LSNH still offers protection and security in the event of a fire. Complete technical specifications for download can be found in the individual data sheets of the H155 cables at the end of this article description.

Examples of use Antenna cables, measuring cables, patch cables, test cables,
Connection cables, extension cables, and much more
2 cables are required for LTE MIMO.
H155 can be used up to 6 GHz.
Application examples H155 PE Amateur radio (HAM)
Radio frequency identification (RFID)
Mobile radio (GSM, LTE, MIMO and UMTS)
Navigation (GPS)
Telephony (DECT)
Wireless radio network technology (WLAN)
General electronics, DC to 6 GHz
Nominal insertion loss for 2m H155
5 MHz

0,05 dB
50 MHz

0,14 dB
100 MHz

0,18 dB
230 MHz

0,27 dB
400 MHz

0,36 dB
800 MHz

0,52 dB
862 MHz

0,55 dB
1000 MHz

0,59 dB
1350 MHz

0,70 dB
1750 MHz

0,81 dB
2150 MHz

0,92 dB
2400 MHz

0,98 dB
3000 MHz

1,13 dB
3600 MHz

1,26 dB
4200 MHz

1,38 dB
4800 MHz

1,50 dB
5400 MHz

1,62 dB
6000 MHz

1,73 dB

The LDF4-50A is a coaxial cable designed and manufactured marketed under the HELIAX brand. This cable has a 1/2 inch diameter and is made with a low-density foam dielectric material that helps to reduce signal loss and provide excellent performance over a wide frequency range. It also features a corrugated copper outer conductor and a solid copper inner conductor, which provide excellent shielding and signal transmission properties. The LDF4-50A cable is designed for use in a variety of high-power applications where signal integrity is critical, such as in wireless communication systems, radio and television broadcasting, and satellite communication. It can handle frequencies of up to 2.5 GHz, and has a high power rating, making it ideal for use in high-power applications. The LDF4-50A coaxial cable is a high-quality and reliable cable that offers excellent signal transmission and shielding properties. Its low-loss, high-power design makes it a popular choice for use in a wide range of applications where high-quality signal transmission is essential. Construction Materials Jacket Material: PE
Outer Conductor Material: Corrugated copper
Dielectric Material: Foam PE
Flexibility; Standard
Inner Conductor Material: Copperclad Aluminum Wire
Jacket Color: Black Dimensions
Nominal Size: 1/2 in
Cable Weight: 0.15 lb/ft | 0.22 kg/m
Diameter Over Dielectric: 12.954 mm | 0.510 in
Diameter Over Jacket:15.875 mm | 0.625 in
Inner Conductor OD: 4.8260 mm | 0.1900 in
Outer Conductor OD: 13.970 mm | 0.550 in Electrical Specifications
Cable Impedance: 50 ohm ±1 ohm
Capacitance: 23.1 pF/ft | 75.8 pF/m
dc Resistance, Inner Conductor 0.450 ohms/kft | 1.480 ohms/km
dc Resistance, Outer Conductor 0.580 ohms/kft | 1.903 ohms/km
dc Test Voltage: 4000 V
Inductance: 0.190 μH/m | 0.058 μH/ft
Insulation Resistance: 100000 MOhm
Jacket Spark Test Voltage (rms): 8000 V
Operating Frequency Band: 1 – 8800 MHz
Peak Power: 40.0 kW
Pulse Reflection: 0.5%
Velocity: 88% Environmental Specifications
Installation Temperature: 40
°C to +60 °C (40
°F to +140 °F) All HELIAX® coaxial cables are jacketed for direct burial or for corrosive environmental conditions.
Standard jacketing material is weather-resistant polyethylene suitable for use in extrem
Made in the USA

Specifications
Product Classification
Product Type Coaxial wireless cable
Product Brand HELIAX® | SureFlex®
Product Series FSJ1-50A | MLOC
General Specifications
Flexibility Superflexible
Jacket Color Black
Performance Note Attenuation values typical, guaranteed within 5%
Dimensions
Diameter Over Dielectric 4.826 mm | 0.19 in
Diameter Over Jacket 7.366 mm | 0.29 in
Inner Conductor OD 1.905 mm | 0.075 in
Outer Conductor OD 6.35 mm | 0.25 in
Nominal Size 1/4 in
Electrical Specifications
Cable Impedance 50 ohm ±1 ohm
Capacitance 79.4 pF/m | 24.201 pF/ft
dc Resistance, Inner Conductor 9.843 ohms/km | 3 ohms/kft
dc Resistance, Outer Conductor 7.216 ohms/km | 2.199 ohms/kft
dc Test Voltage 1600 V
Inductance 0.2 µH/m | 0.061 µH/ft
Insulation Resistance 100000 MOhms-km
Jacket Spark Test Voltage (rms) 5000 V
Operating Frequency Band 1 – 18000 MHz
Peak Power 6.4 kW
Velocity 82 %

Given a power fed to the X value (any value expressed in Watts), the actual power output of the cable is shown in the table in the form
of remaining percentage. (for example, if we use a cable such as
M&P-HYPERFLEX 13, entering 1000 Watts over a length of 35m, at a frequency of 144 MHz, there remains 74.7 % of 1000).
For maximum applicable power, see the Power Handling of the cable concerned. From these values, have already been deducted the
SRL values, typical of each one of our models, for the respective frequencies.
REMEMBER: Make sure to match the line accurately!

Coax Type : Coaxial
Conductor Material : Copper Clad Aluminium
Conductor Type : Solid Conductor
Dielectric Material : FPE-FOAMED (Cellular) Polyethylene
Fire Rating : General Purpose (CM, CMG, CMX)
Flooded : No, Do Not Flood Over Braid
Impedance : 50 OHM nominal Impedance
Jacket Material : PE-Polyethylene
Outdoor : YES, Outdoor Grade Material
Screen/Shield Type : Both, Braid Over Foil

Coax Type : Coaxial
Conductor Material : Copper Clad Aluminium
Conductor Type : Solid Conductor
Dielectric Material : FPE-FOAMED (Cellular) Polyethylene
Fire Rating : General Purpose (CM, CMG, CMX)
Flooded : No, Do Not Flood Over Braid
Impedance : 50 OHM nominal Impedance
Jacket Material : PE-Polyethylene
Outdoor : YES, Outdoor Grade Material
Screen/Shield Type : Both, Braid Over Foil

Coax Type : Coaxial
Conductor Material : Copper Clad Aluminium
Conductor Type : Solid Conductor
Dielectric Material : FPE-FOAMED (Cellular) Polyethylene
Fire Rating : General Purpose (CM, CMG, CMX)
Flooded : No, Do Not Flood Over Braid
Impedance : 50 OHM nominal Impedance
Jacket Material : PE-Polyethylene
Outdoor : YES, Outdoor Grade Material
Screen/Shield Type : Both, Braid Over Foil

High quality coaxial cable LMR600 with lowloss properties. The sheath is made of PE and is fully suitable for outdoor use. The manufacturer gives a 20 year guarantee on the UV resistance of its LMR cable.
Transmission power with 3G or WLAN up to 600 watts suitable. Application: radio application, broadband communication, automotive sector, components in wireless communication systems LMR 600: (Sheath colour: black) 50Ω,
Temperature range -40°C to +85°C LMR-600 (TIMES MW) COAXIAL CABLE MATERIAL DIAMETER
INNER CONDUCTOR AlCu solid Ø 4.47 mm
DIELECTRIC PE fm Ø 11.56 mm
CABLE SCREEN Aluminium foil , Tinned copper braiding Ø 12.45 mm
CABLE SHEATH PE, black Ø 14.99 mm

Cable LOW LOSS CABLE (2M) set connectors SMA MALE/SMA FEMALE

Cable M 200 LOW LOSS CABLE (5M) set connectors SMA MALE/SMA FEMALE