Solder Flux UV Paste Liquid

Multi Purpose Glue Adhensive E-8000 For Mobile Phone Universal Repair Glue E8000 has exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry and concrete. It also adheres strongly to leather, rubber, vinyl and many plastics.
Capacity:E-8000 110ml
Surace drying time: 3 minutes
Solid content:35% -40%
Full cure time: 24-48 hours
Storage: Save at 28ºC of preservation

Special glue for various reasons the lens ink is too thin, vulnerable to solvent corrosion,
the lens adhesive in panel ABS, the solvent evaporated (about 5 minutes), then the lens attached.

Crystal Glue H9000 for Mobile Phone LCD Repair Rhinestone DIY Jewelry Fix etc... Features waterproof, flexible, non-flammable and paintable Sealed function: Screw the cap off the tube, apply the sealant to the clean position evenly, combine the panel instantly and gently press the areas around the panel with fingers to make the glue become smoothly Curing: The sealant will lose viscosity and dry on the surface in 10 - 15 minutes, it needs 24 hours for the panel to be bonded at room temperature Attention: Screw the cap on after use of the sealant for sealed storage Storage: Keep tightly sealed in a cool, dark, dry place Environment protection and non- toxic Storage life: 12 months Package included: 1 x 80g H9000 Crystal Glue
1 x Safety Pin
1 x Spare Cap
1 x Nozzle

Ruderer L530 TF plastic glue
Contents: Ruderer L 530 TF plastic glue.
Technical data:
- Special Glue for Apple iPhone
- Suitable to paste the display to the Touch Unit and the Frontcover
- Especially for small plastic parts
- Very fast drying
- Colorless, thin, brushable
Special glue for touch,PS,PSB,ABS,Plexi,PVC - glue is not gor glass touches!
Compatible with e.g. Apple iPhone 2G, 3G, 3GS, 4, 4S, Samsung, Nokia, LG, Sony Ericsson

T-6000 contact adhesive can be used on many materials, but Zhanlida recommends it as the basic choice for mobile phone repair, tablet repair when a high temperature resistant adhesive is needed, its solid content, the cure time and viscosity make it an excellent strong adhesive. Characteristics: Waterproof
No powder residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick release and easy to clean
Fast curing in 3-5 minutes (depending on material)
Specific: Solid content: 30% – 35%
Color: transparent
Size / Liquid Measurement: 25ML
Cured hardness: 70-85B
Concentration / Viscosity: 4800 mpa.s
Temperature range: -35°C ~ +120°C
Curing time: 3-5 minutes (fast) 24-48 hours (full)

Craft Jewelry Tools.
Specifications:
Glue Color: Black
Appearance: transparent semi Floating Body
Solid Content: 33%-38%
Surface Drying Time: 3 minutes
Completely Cure Time: 24-48 hours
Save: at degrees to 28degrees of preservation
Weight: 130g Attention:
1. Keep away from ignition sources when use.
2. Please put this item in well-ventilated environment.
3. Please keep it in the palace where children can’t reach.
4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes The reliable Zhanlida T-7000 glue is effectively used for gluing various parts. Its technical parameters have made it popular and often used in the field of electronics. This multipurpose compound can be used for gluing metal, glass, plastic and wooden materials, as well as electrical components and other items. Review of Zhanlida T-7000 glue 110ml Glue-sealant for gluing tachskrinov t7000 is widely used for the restoration of electronic gadgets. This glue is offered in thick polyethylene tubes of different sizes and has such characteristics that make it almost universal. The tube is equipped with a thin metal tip, which makes it possible to conveniently apply the composition to different surfaces, regulating its required quantity. The T7000 is considered practical and convenient to use, as it becomes ductile when heated to a temperature of 80-100 ° C. Previously glued materials can be freed from soft glue, if necessary. This feature allows the use of T-7000 glue to replace broken lids or glasses during the repair of many mobile phones. Step-by-step instruction on the use of T-7000 glue Adhesive is easy to use and is used according to the following scheme, which is suggested in the instructions to the composition: Glued surfaces of a gadget or other object must be previously cleaned of dust and old glue.
After the surfaces are cleaned, they are degreased. It is necessary to allow the surfaces to dry out.
When the surfaces are completely dry, you can start applying the adhesive to the necessary layer. If you need to attach a touchscreen, then do not immediately connect it to the surface of the smartphone. You need to wait a few minutes for the glue to freeze. After the glue becomes more viscous, you need to connect the touch panel to the frame. Then it is necessary to press the surfaces together. This method avoids the flow of glue between the screen and the touchscreen to prevent the formation of streaks.
Bonded surfaces that have been joined together, should be pressed and left for a while (about a day) in this position until completely dry. Despite the fact that the final drying will occur in twenty-four hours, it is worth starting to use the glued product in forty-eight hours, so that the result is more reliable.
If in the process of gluing materials there are excess glues, then removing them will be very easy by rolling. It is enough to hold a non-sharp object or a finger in places where the composition has gone beyond the boundaries of the working surfaces, so that the glue begins to gather in lumps. From the slots it is easily removed with a needle

Craft Jewelry Tools.
Specifications:
Glue Color: Black
Appearance: transparent semi Floating Body
Solid Content: 33%-38%
Surface Drying Time: 3 minutes
Completely Cure Time: 24-48 hours
Save: at degrees to 28degrees of preservation
Attention:
1. Keep away from ignition sources when use.
2. Please put this item in well-ventilated environment.
3. Please keep it in the palace where children can’t reach.
4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes The reliable Zhanlida T-7000 glue is effectively used for gluing various parts. Its technical parameters have made it popular and often used in the field of electronics. This multipurpose compound can be used for gluing metal, glass, plastic and wooden materials, as well as electrical components and other items. Review of Zhanlida T-7000 glue 15ml Glue-sealant for gluing tachskrinov t7000 is widely used for the restoration of electronic gadgets. This glue is offered in thick polyethylene tubes of different sizes and has such characteristics that make it almost universal. The tube is equipped with a thin metal tip, which makes it possible to conveniently apply the composition to different surfaces, regulating its required quantity. The T7000 is considered practical and convenient to use, as it becomes ductile when heated to a temperature of 80-100 ° C. Previously glued materials can be freed from soft glue, if necessary. This feature allows the use of T-7000 glue to replace broken lids or glasses during the repair of many mobile phones. Step-by-step instruction on the use of T-7000 glue Adhesive is easy to use and is used according to the following scheme, which is suggested in the instructions to the composition: Glued surfaces of a gadget or other object must be previously cleaned of dust and old glue.
After the surfaces are cleaned, they are degreased. It is necessary to allow the surfaces to dry out.
When the surfaces are completely dry, you can start applying the adhesive to the necessary layer. If you need to attach a touchscreen, then do not immediately connect it to the surface of the smartphone. You need to wait a few minutes for the glue to freeze. After the glue becomes more viscous, you need to connect the touch panel to the frame. Then it is necessary to press the surfaces together. This method avoids the flow of glue between the screen and the touchscreen to prevent the formation of streaks.
Bonded surfaces that have been joined together, should be pressed and left for a while (about a day) in this position until completely dry. Despite the fact that the final drying will occur in twenty-four hours, it is worth starting to use the glued product in forty-eight hours, so that the result is more reliable.
If in the process of gluing materials there are excess glues, then removing them will be very easy by rolling. It is enough to hold a non-sharp object or a finger in places where the composition has gone beyond the boundaries of the working surfaces, so that the glue begins to gather in lumps. From the slots it is easily removed with a needle

Stronger New T-7000 Glue 50ml Zhanlida Black Super Adhesive Cell Phone Touch Screen Repair Frame Sealant Diy Craft Jewelry Tools.
Specifications:
Glue Color: Black
Appearance: transparent semi Floating Body
Solid Content: 33%-38%
Surface Drying Time: 3 minutes
Completely Cure Time: 24-48 hours
Save: at degrees to 28degrees of preservation
Weight: 60g

Attention:
1. Keep away from ignition sources when use.
2. Please put this item in well-ventilated environment.
3. Please keep it in the palace where children can’t reach.
4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes

Best selection of adhesives they have to offer - they are all stored here to strict specifications and stored in data batches to ensure you get a consistent, reliable bond every time.
We recommend T-8000 as a great repair adhesive, it will work well in situations that require something a little stronger such as brackets under stress or moving parts. T8000 T-8000 Contact adhesive is the staple choice for mobile phone and tablet repair, its solid content, curing time and viscosity make it a great strong adhesive. Water resistant
No powder residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick and easy to clean overspill
Quick cures in 3-5 minutes (depending on material) Specification: Solid Content: 33% - 38%
Colour: Clear
Size / Liquid measurement: 110ML
Cured Hardness: 70-85A
Concentration / Viscosity: 4800mpa.s
Temperature range: -35°c ~ +90°c
Curing time: 3-5 Minutes (Quick) 24-48 Hours (Full)

Multi-Purpose Glue AdhensiveT-8000 For Mobile Phone Universal Repair Glue 15ML Capacity:T-8000 15ml
Glial: transparent , soft plastic, high strength
Solid content:33% -38%
After curing Hardness: 70-85T
Surface drying time: 3 minutes to 5 minutes or so positioning
Full cure time: 24-48 hours
Storage:Save at 10 ºC to 28ºC
Temperature range: -35ºC to 80 ºC Features: not stiff,Ultra-low odor,Not easy wire drawing. Instructions:
1. before use carefully read the introduction.
2. please do test in a small area in advance.
3. Make sure that the surface clean and dry.
4. the optimum temperature should be between 18-32 degrees.
5. wait 3-6 minutes, and the two are aligned adhesive sticky little pressure.
6. Wait 48 hours to reach the best condition.
7. After applying glue, please cover the lid. Precautions:
1, may be irritating to the skin and eyes.
2. Use in a well-ventilated environment.
3. In case of contact with eyes, rinse with plenty of water.
4. Keep away from children.
5. store in dry and cool place. Applicable to:PVC / ABS / rubber, plastic, leather, sponge, wood, paper, doll toys, glass, ceramics, metal, painting line glue, point drilling rhinestone ornaments, frame, lighting, cloth, crafts, headphones, EPDM rubber, sponge rubber , Felt, canvas, linoleum carpet, ear plugs and other materials between the mutual sticky and sticky self-adhesive, is the ideal choice for production and industry
Package includes:
1X T-8000 GLUE 15ML

Multi Purpose Glue Adhensive T-8000 For Mobile Phone Universal Repair Glue 50ML.
Capacity:T-8000 50ml
Glial: transparent, soft plastic, high strength
Solid content:33% -38%
After curing Hardness: 70-85T
Surface drying time: 3 minutes to 5 minutes or so positioning
Full cure time: 24-48 hours
Storage:Save at 10 ºC to 28ºC
Temperature range: -35ºC to 80 ºC Features: not stiff,Ultra-low odor,Not easy wire drawing. Instructions:
1. before use carefully read the introduction.
2. please do test in a small area in advance.
3. Make sure that the surface clean and dry.
4. the optimum temperature should be between 18-32 degrees.
5. wait 3-6 minutes, and the two are aligned adhesive sticky little pressure.
6. Wait 48 hours to reach the best condition.
7. After applying glue, please cover the lid. Precautions:
1, may be irritating to the skin and eyes.
2. Use in a well-ventilated environment.
3. In case of contact with eyes, rinse with plenty of water.
4. Keep away from children.
5. store in dry and cool place. Applicable to:PVC / ABS / rubber, plastic, leather, sponge, wood, paper, doll toys, glass, ceramics, metal, painting line glue, point drilling rhinestone ornaments, frame, lighting, cloth, crafts, headphones, EPDM rubber, sponge rubber , Felt, canvas, linoleum carpet, ear plugs and other materials between the mutual sticky and sticky self-adhesive, is the ideal choice for production and industry
Package includes:
1X T-8000 GLUE 50ML

Stronger Waterproof T-9000 Glue 110ml Clear Super Adhesive Cell Phone Touch Screen. Characteristics:
Colorless
Water proof
Strong adhesion
Fast & easy processing
Odor
Shock resistand Technical specifications:
Solids content: 30% -35%
Hardness after curing: 65-80A
Drying time of the surface: 3-6 min.
Full curing time: 24 - 48 hours
Storage: Storage at 10 to 28 degrees
Net content: 15 ml

Stronger Waterproof T-9000 Glue 15ml Clear Super Adhesive Cell Phone Touch Screen. Characteristics:
Colorless
Water proof
Strong adhesion
Fast & easy processing
Odor
Shock resistand Technical specifications:
Solids content: 30% -35%
Hardness after curing: 65-80A
Drying time of the surface: 3-6 min.
Full curing time: 24 - 48 hours
Storage: Storage at 10 to 28 degrees
Net content: 15 ml

Zhanlida T Hard also called ZHANLIDA T and this contact adhesive can be used on many materials, it is upgraded from T7000+T9000S which combined the advantages of both and improved its durability, Zhanlida recommend it as the basic choice for repairing of mobile, tablet repair when you need a high performance adhesive such as T7000 and T9000S, its solids content, cure time and viscosity make it a great strong adhesive. Great hard setting
Difficult setup
No powder residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick release and easy to clean
Fast curing in 3-6 minutes (depending on material)
Specific: Solid content: 33% – 45%
Black colour
Size / Liquid Measurement: 50ML
Cured hardness: 68-85T
Concentration / Viscosity: 4500mpa.s
Temperature range: -35°c ~ +90°c
Curing time: 3-6 minutes (fast) 24 hours (full)

Desoldering metalic pump ZD-190 with tip teflon

Special dispergator instant glue remover solution solvent. It can 100% remove 502 glue,101 glue,etc all type of glue,especial clear uv glue when you spearate the LCD
Debonder AD.1
Easy clear adhesive liquid Note: Extremely Flammable: When using keep ventilation well and put off fire.Store this in dry and cool place below 50℃.Keep away from children.

UV optical liquid glue LOCA of adhesive can be used as a transparent optical materials, such as ITO film, PMMA, PC, PET, glass, electronic paper, projection screen, display, lens assembly, assembly assembly, capacitive touch screen, resistive touch screen panel, ICON, and other related electronic optical material of adhesive. These transparent isotropic without backing adhesive ensures accurate color and full display brightness, and to provide durable, high strength adhesive effect. Loca glue for touch screen and lcd screen
Separator for broken touch panel
Loca glue to sticker lcd and touch panel Note: the glue need uv light curing,and curing energy for 1.5j,and best power is 125w,and curing time is 9minutes. Brookfield viscosity (25 C) : 2500 mPa, Refractive index (25) : 1.48 ,
Transmission (%) : >99, Haze : 1000, Store hardness : 10, Storage temp : 10~30 C- RH<70%

Glue LOCA UV for repair touch LCD (5ml)