Solder Flux UV Paste Liquid

UV Liquid Tempered glass LED Lamp Curing

Craft Jewelry Tools.
Specifications:
Glue Color: Black
Appearance: transparent semi Floating Body
Solid Content: 33%-38%
Surface Drying Time: 3 minutes
Completely Cure Time: 24-48 hours
Save: at degrees to 28degrees of preservation


Attention:
1. Keep away from ignition sources when use.
2. Please put this item in well-ventilated environment.
3. Please keep it in the palace where children canʼt reach.
4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes

The reliable Zhanlida T-7000 glue is effectively used for gluing various parts. Its technical parameters have made it popular and often used in the field of electronics. This multipurpose compound can be used for gluing metal, glass, plastic and wooden materials, as well as electrical components and other items.

Review of Zhanlida T-7000 glue 15ml

Glue-sealant for gluing tachskrinov t7000 is widely used for the restoration of electronic gadgets.

This glue is offered in thick polyethylene tubes of different sizes and has such characteristics that make it almost universal.

The tube is equipped with a thin metal tip, which makes it possible to conveniently apply the composition to different surfaces, regulating its required quantity.

The T7000 is considered practical and convenient to use, as it becomes ductile when heated to a temperature of 80-100 ° C. Previously glued materials can be freed from soft glue, if necessary.

This feature allows the use of T-7000 glue to replace broken lids or glasses during the repair of many mobile phones.

Step-by-step instruction on the use of T-7000 glue

Adhesive is easy to use and is used according to the following scheme, which is suggested in the instructions to the composition:

Glued surfaces of a gadget or other object must be previously cleaned of dust and old glue.
After the surfaces are cleaned, they are degreased. It is necessary to allow the surfaces to dry out.
When the surfaces are completely dry, you can start applying the adhesive to the necessary layer. If you need to attach a touchscreen, then do not immediately connect it to the surface of the smartphone. You need to wait a few minutes for the glue to freeze. After the glue becomes more viscous, you need to connect the touch panel to the frame. Then it is necessary to press the surfaces together. This method avoids the flow of glue between the screen and the touchscreen to prevent the formation of streaks.
Bonded surfaces that have been joined together, should be pressed and left for a while (about a day) in this position until completely dry. Despite the fact that the final drying will occur in twenty-four hours, it is worth starting to use the glued product in forty-eight hours, so that the result is more reliable.
If in the process of gluing materials there are excess glues, then removing them will be very easy by rolling. It is enough to hold a non-sharp object or a finger in places where the composition has gone beyond the boundaries of the working surfaces, so that the glue begins to gather in lumps. From the slots it is easily removed with a needle

ProductKAISI Green Black UV Curing Solder Mask BGA PCB Paint Prevent Corrosive Arcing Soldering Paste Flux PCB UV Photosensitive Ink (Color Black)Features:Insulates printed circuit board against shorting and arcing.This paint is used to protect PCB traces from corrosion, moisture.It is also used for repairing PCB after soldering, rework.Apply paint on your PCB.Spread it on the PCB with covering the transparent mask film.Expose it under UV light ( or sun ) for a few minutes.Wash away the extra paint by gasoline or oil base solvent.Package Included:1 x KAISI Green/Black UV Curing Solder Mask InkDetail Pictures:More InformationPlease see Payment & Shipping for information regarding shipping and delivery lead times and other important information.Please confirm stock availability before purchasing.More ProductsView More Products

Special tool for put the flux oil out of bottle

Stronger Waterproof T-9000 Glue 15ml Clear Super Adhesive Cell Phone Touch Screen.

Characteristics:
Colorless
Water proof
Strong adhesion
Fast & easy processing
Odor
Shock resistand

Technical specifications:
Solids content: 30% -35%
Hardness after curing: 65-80A
Drying time of the surface: 3-6 min.
Full curing time: 24 - 48 hours
Storage: Storage at 10 to 28 degrees
Net content: 15 ml

ProductKAISI Green Black UV Curing Solder Mask BGA PCB Paint Prevent Corrosive Arcing Soldering Paste Flux PCB UV Photosensitive Ink (Color Black)Features:Insulates printed circuit board against shorting and arcing.This paint is used to protect PCB traces from corrosion, moisture.It is also used for repairing PCB after soldering, rework.Apply paint on your PCB.Spread it on the PCB with covering the transparent mask film.Expose it under UV light ( or sun ) for a few minutes.Wash away the extra paint by gasoline or oil base solvent.Package Included:1 x KAISI Green/Black UV Curing Solder Mask InkDetail Pictures:More InformationPlease see Payment & Shipping for information regarding shipping and delivery lead times and other important information.Please confirm stock availability before purchasing.More ProductsView More Products

Special glue for touch display B7000 (15ml) without drying UV rays.
Multi purpose adhesives, Gravity magic rubber.
Waterproof, Flexible, Stimulate the taste free, Anti-Vibration, Paintable.

Brand available Zhanlida, Sunshine, Relife

Special glue for touch display B7000 (50ml) without drying UV rays.
Multi purpose adhesives, Gravity magic rubber.
Waterproof, Flexible, Stimulate the taste free, Anti-Vibration, Paintable.

FLUX ROCK (1Box) tablet to clear and help to do solder

Threaded Needle, 22 gauge x 1/2 in length, Fluid Dispensing, For Use With 5VZW4 and 5VZW5 Shot Meters, Package Quantity 5 Features
Application : Fluid Dispensing
For Use With : G0793274 and G0749646
Shot Meters Item : Threaded Needle
Characteristics : 22 gauge x 1/2 in length
ackage Quantity : 5

Stronger New T-7000 Glue 50ml Zhanlida Black Super Adhesive Cell Phone Touch Screen Repair Frame Sealant Diy Craft Jewelry Tools.
Specifications:
Glue Color: Black
Appearance: transparent semi Floating Body
Solid Content: 33%-38%
Surface Drying Time: 3 minutes
Completely Cure Time: 24-48 hours
Save: at degrees to 28degrees of preservation
Weight: 60g

Attention:
1. Keep away from ignition sources when use.
2. Please put this item in well-ventilated environment.
3. Please keep it in the palace where children canʼt reach.
4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes

Zhanlida T Hard also called ZHANLIDA T and this contact adhesive can be used on many materials, it is upgraded from T7000+T9000S which combined the advantages of both and improved its durability, Zhanlida recommend it as the basic choice for repairing of mobile, tablet repair when you need a high performance adhesive such as T7000 and T9000S, its solids content, cure time and viscosity make it a great strong adhesive.

Great hard setting
Difficult setup
No powder residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick release and easy to clean
Fast curing in 3-6 minutes (depending on material)
Specific:

Solid content: 33% – 45%
Black colour
Size / Liquid Measurement: 50ML
Cured hardness: 68-85T
Concentration / Viscosity: 4500mpa.s
Temperature range: -35°c ~ +90°c
Curing time: 3-6 minutes (fast) 24 hours (full)

Multi-Purpose Glue AdhensiveT-8000 For Mobile Phone Universal Repair Glue 15ML

Capacity:T-8000 15ml
Glial: transparent , soft plastic, high strength
Solid content:33% -38%
After curing Hardness: 70-85T
Surface drying time: 3 minutes to 5 minutes or so positioning
Full cure time: 24-48 hours
Storage:Save at 10 ºC to 28ºC
Temperature range: -35ºC to 80 ºC

Features: not stiff,Ultra-low odor,Not easy wire drawing.

Instructions:
1. before use carefully read the introduction.
2. please do test in a small area in advance.
3. Make sure that the surface clean and dry.
4. the optimum temperature should be between 18-32 degrees.
5. wait 3-6 minutes, and the two are aligned adhesive sticky little pressure.
6. Wait 48 hours to reach the best condition.
7. After applying glue, please cover the lid.

Precautions:
1, may be irritating to the skin and eyes.
2. Use in a well-ventilated environment.
3. In case of contact with eyes, rinse with plenty of water.
4. Keep away from children.
5. store in dry and cool place.

Applicable to:PVC / ABS / rubber, plastic, leather, sponge, wood, paper, doll toys, glass, ceramics, metal, painting line glue, point drilling rhinestone ornaments, frame, lighting, cloth, crafts, headphones, EPDM rubber, sponge rubber , Felt, canvas, linoleum carpet, ear plugs and other materials between the mutual sticky and sticky self-adhesive, is the ideal choice for production and industry


Package includes:
1X T-8000 GLUE 15ML

Zhanlida B-6000 Contact adhesive can be used on many materials but Zhanlida recommend it as the staple choice for cellphone repair, tablet repair, toys, diamond, decoration, flower, cloth, shell, jewelry, crafts , its solid content, curing time and viscosity make it a great strong adhesive.


Water resistant
No powder residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick and easy to clean overspill
Quick cures in 3-5 minutes (depending on material)

Specification:

Solid Content: 35% – 41%
Colour: Clear
Size / Liquid measurement: 9ML / 15ML / 25ML / 50ML / 110ML
Cured Hardness: 70-81B
Concentration / Viscosity: 5200mpa.s
Temperature range: -35°c ~ +90°c
Curing time: 4-6 Minutes (Quick) 24-48 Hours (Full)

Details:

This is how its applicator tip looks like

Multi Purpose Glue Adhensive T-8000 For Mobile Phone Universal Repair Glue 50ML.
Capacity:T-8000 50ml
Glial: transparent, soft plastic, high strength
Solid content:33% -38%
After curing Hardness: 70-85T
Surface drying time: 3 minutes to 5 minutes or so positioning
Full cure time: 24-48 hours
Storage:Save at 10 ºC to 28ºC
Temperature range: -35ºC to 80 ºC Features: not stiff,Ultra-low odor,Not easy wire drawing. Instructions:
1. before use carefully read the introduction.
2. please do test in a small area in advance.
3. Make sure that the surface clean and dry.
4. the optimum temperature should be between 18-32 degrees.
5. wait 3-6 minutes, and the two are aligned adhesive sticky little pressure.
6. Wait 48 hours to reach the best condition.
7. After applying glue, please cover the lid. Precautions:
1, may be irritating to the skin and eyes.
2. Use in a well-ventilated environment.
3. In case of contact with eyes, rinse with plenty of water.
4. Keep away from children.
5. store in dry and cool place. Applicable to:PVC / ABS / rubber, plastic, leather, sponge, wood, paper, doll toys, glass, ceramics, metal, painting line glue, point drilling rhinestone ornaments, frame, lighting, cloth, crafts, headphones, EPDM rubber, sponge rubber , Felt, canvas, linoleum carpet, ear plugs and other materials between the mutual sticky and sticky self-adhesive, is the ideal choice for production and industry
Package includes:
1X T-8000 GLUE 50ML

Flux oil paste in shape YX-223, BK-223 (10cc) BEST

Craft Jewelry Tools.
Specifications:
Glue Color: Black
Appearance: transparent semi Floating Body
Solid Content: 33%-38%
Surface Drying Time: 3 minutes
Completely Cure Time: 24-48 hours
Save: at degrees to 28degrees of preservation
Weight: 130g

Attention:
1. Keep away from ignition sources when use.
2. Please put this item in well-ventilated environment.
3. Please keep it in the palace where children canʼt reach.
4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes

The reliable Zhanlida T-7000 glue is effectively used for gluing various parts. Its technical parameters have made it popular and often used in the field of electronics. This multipurpose compound can be used for gluing metal, glass, plastic and wooden materials, as well as electrical components and other items.

Review of Zhanlida T-7000 glue 110ml

Glue-sealant for gluing tachskrinov t7000 is widely used for the restoration of electronic gadgets.

This glue is offered in thick polyethylene tubes of different sizes and has such characteristics that make it almost universal.

The tube is equipped with a thin metal tip, which makes it possible to conveniently apply the composition to different surfaces, regulating its required quantity.

The T7000 is considered practical and convenient to use, as it becomes ductile when heated to a temperature of 80-100 ° C. Previously glued materials can be freed from soft glue, if necessary.

This feature allows the use of T-7000 glue to replace broken lids or glasses during the repair of many mobile phones.

Step-by-step instruction on the use of T-7000 glue

Adhesive is easy to use and is used according to the following scheme, which is suggested in the instructions to the composition:

Glued surfaces of a gadget or other object must be previously cleaned of dust and old glue.
After the surfaces are cleaned, they are degreased. It is necessary to allow the surfaces to dry out.
When the surfaces are completely dry, you can start applying the adhesive to the necessary layer. If you need to attach a touchscreen, then do not immediately connect it to the surface of the smartphone. You need to wait a few minutes for the glue to freeze. After the glue becomes more viscous, you need to connect the touch panel to the frame. Then it is necessary to press the surfaces together. This method avoids the flow of glue between the screen and the touchscreen to prevent the formation of streaks.
Bonded surfaces that have been joined together, should be pressed and left for a while (about a day) in this position until completely dry. Despite the fact that the final drying will occur in twenty-four hours, it is worth starting to use the glued product in forty-eight hours, so that the result is more reliable.
If in the process of gluing materials there are excess glues, then removing them will be very easy by rolling. It is enough to hold a non-sharp object or a finger in places where the composition has gone beyond the boundaries of the working surfaces, so that the glue begins to gather in lumps. From the slots it is easily removed with a needle

The soldering flux RF 800 for SMD. A special dropper helps to proportion accurately. It does not need to clean.

Special glue for touch display B7000 without drying UV rays.
Multi purpose adhesives, Gravity magic rubber.
Waterproof, Flexible, Stimulate the taste free, Anti-Vibration, Paintable.
Hardness 65-80A

Best selection of adhesives they have to offer - they are all stored here to strict specifications and stored in data batches to ensure you get a consistent, reliable bond every time.


We recommend T-8000 as a great repair adhesive, it will work well in situations that require something a little stronger such as brackets under stress or moving parts.

T8000

T-8000 Contact adhesive is the staple choice for mobile phone and tablet repair, its solid content, curing time and viscosity make it a great strong adhesive.

Water resistant
No powder residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick and easy to clean overspill
Quick cures in 3-5 minutes (depending on material)

Specification:

Solid Content: 33% - 38%
Colour: Clear
Size / Liquid measurement: 110ML
Cured Hardness: 70-85A
Concentration / Viscosity: 4800mpa.s
Temperature range: -35°c ~ +90°c
Curing time: 3-5 Minutes (Quick) 24-48 Hours (Full)

Solder Paste Best BST-706, Lead-free, 10cc Tube.

Rosin flux is used to facilitate soldering.
It cleans and prevents metal oxidation which allows solder to create strong, long lasting mechanical and electrical bonds.
It also acts as a wetting agent, increasing the flow of solder and the efficiency of the soldering process.
Perfect for mobile phones, PC cards and other sophisticated electronic chip-level flux welding.

Εξαιρετικά αποδοτική flux πάστα συγκόλλησης Best με melting point 60°C.

Χαρακτηριστικά
Color: λευκό
Melting point: 60°C
N.W.: 10g

This model NC-223-ASM halogen-free environmental protection welding paste, specifically for mobile phonesChips, cell phone lines maintenance, etc.
Cleaning is required after welding.
No oxidation after welding, high resistance. No halogen (F / CL / BR / I) material and other advantages.
The paste body viscosity is moderate, fine particle size, generally in 5-10 m.

Stronger Waterproof T-9000 Glue 110ml Clear Super Adhesive Cell Phone Touch Screen.

Characteristics:
Colorless
Water proof
Strong adhesion
Fast & easy processing
Odor
Shock resistand

Technical specifications:
Solids content: 30% -35%
Hardness after curing: 65-80A
Drying time of the surface: 3-6 min.
Full curing time: 24 - 48 hours
Storage: Storage at 10 to 28 degrees
Net content: 15 ml

T-6000 contact adhesive can be used on many materials, but Zhanlida recommends it as the basic choice for mobile phone repair, tablet repair when a high temperature resistant adhesive is needed, its solid content, the cure time and viscosity make it an excellent strong adhesive.

Characteristics:

Waterproof
No powder residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick release and easy to clean
Fast curing in 3-5 minutes (depending on material)
Specific:

Solid content: 30% – 35%
Color: transparent
Size / Liquid Measurement: 25ML
Cured hardness: 70-85B
Concentration / Viscosity: 4800 mpa.s
Temperature range: -35°C ~ +120°C
Curing time: 3-5 minutes (fast) 24-48 hours (full)

Special glue for various reasons the lens ink is too thin, vulnerable to solvent corrosion,
the lens adhesive in panel ABS, the solvent evaporated (about 5 minutes), then the lens attached.

Ruderer L530 TF plastic glue
Contents: Ruderer L 530 TF plastic glue.
Technical data:
- Special Glue for Apple iPhone
- Suitable to paste the display to the Touch Unit and the Frontcover
- Especially for small plastic parts
- Very fast drying
- Colorless, thin, brushable
Special glue for touch,PS,PSB,ABS,Plexi,PVC - glue is not gor glass touches!
Compatible with e.g. Apple iPhone 2G, 3G, 3GS, 4, 4S, Samsung, Nokia, LG, Sony Ericsson

Flux oil paste in shape RMA-223.
Chemical Characteristics

State Viscous
Colour Yellow
Odour Mildly, sweet odor
PH (5%aq. sol.) 3 (35% sol. of flux)
IPC-and EN-Classification RE/L0


JV-F000

Flash Point 158°C
Solubility in water Insoluble
Auto-ignition point > 370°C
Specific Gravity 1.032g/ml
Viscosity at 20°C ± 210.000 cPs
(Brookfield 5 RPM, TF spindle)

Flux oil BEST-228AMT welding oil is high-quality pre-alloy powder and resin-based solder

flux paste evenly mixed into the welding oil. It a special The gel additive mixtures, it
can prevent the residual object is light yellow and easy to remove tin ball, smoke-

free environment, this oil meet the ANSI-welding stb-004-006 standards.

Glue LOCA UV for repair touch LCD (5ml)

Liquid bottle PC3 1L for cleanser after ultrasonic water cleaner

Multi Purpose Glue Adhensive E-8000 For Mobile Phone Universal Repair Glue E8000 has exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry and concrete. It also adheres strongly to leather, rubber, vinyl and many plastics.
Capacity:E-8000 15ml
Surace drying time: 3 minutes
Solid content:35% -40%
Full cure time: 24-48 hours
Storage: Save at 28ºC of preservation

Flux oil paste in shape Yaxun YX-228 (10cc)

Crystal Glue H9000 for Mobile Phone LCD Repair Rhinestone DIY Jewelry Fix etc...

Features waterproof, flexible, non-flammable and paintable

Sealed function: Screw the cap off the tube, apply the sealant to the clean position evenly, combine the panel instantly and gently press the areas around the panel with fingers to make the glue become smoothly

Curing: The sealant will lose viscosity and dry on the surface in 10 - 15 minutes, it needs 24 hours for the panel to be bonded at room temperature

Attention: Screw the cap on after use of the sealant for sealed storage

Storage: Keep tightly sealed in a cool, dark, dry place

Environment protection and non- toxic

Storage life: 12 months

Package included:

1 x 80g H9000 Crystal Glue
1 x Safety Pin
1 x Spare Cap
1 x Nozzle

The soldering flux RF 800 (ART 056) for SMD. A special dropper helps to proportion accurately. It does not need to clean.

Special YX-636 lead free bga flux welding soldeing flux

Specifications
Apply to BGA lead free soldering Flux,No cleaning,High Pertormance,High reliability

Features of Flux:
1.Advanced SMT solider products
2.Environment friendly flux of no cleaning, no chlorine and no foul smell
3.Fugacity resistant flux
4.High performance, high reliability flux
5.To be used specially for hand-wrought hotair rewelding the hand set IC of model BGA

Special dispergator instant glue remover solution solvent.

It can 100% remove 502 glue,101 glue,etc all type of glue,especial clear uv glue when you spearate the LCD
Debonder AD.1
Easy clear adhesive liquid

Note: Extremely Flammable: When using keep ventilation well and put off fire.Store this in dry and cool place below 50℃.Keep away from children.

For lab samples, small series, model-making, or for the professional use of SMD-components with hot air pistons, hot plate, soldering iron etc. They are conveniently stored in syringes and therefore quarantee a clean and accurate usage. The soldering paste can be used directly from the cartridge, no mixing is needed. Especially helpful for very dense placement.

Easy handling with controlled hot air- or electronic soldering iron - apply the dosed soldering paste on the solder joint, place the components, warm the solder joint, the SMD solder joint and the SMD-circuit are ready. The soldering paste can also be applied for SMD-Rework as new contact layer. Soldering paste ist a supply material like solder wire, solder blotting wick, rosin and belongs to every solder joint.
The product is paste-like, the colour is silver-grey.
Recommended soldering temperature: 280°C

Contents: 50g, enough for ca. 30.000 solder joints
Storage stability: ca. 5-6 months, storage in the refrigerator is recommended (0-10°C).

The CS-FLUX is a no-clean solder auxiliary highly liquid, lead-free specially designed for repairing BGA components (reballing and reflow) and other SMD components in laptop, gaming consoles etc.

Key features in CS-FLUX:

    The CS-FLUX when heated to approximately 150 degrees is converted into liquid and completely covers the micro gap between component BGA and PCB. In this manner all the "balls" of the component are covered with CS-FLUX and during reflow or removal of the fitting all the pad of the component and the PCB are not destroyed.
    The CS-FLUX is no clean flux but if necessary can be easily cleaned with alcohol. Causes no corrosion to the PCB and components.
    Thanks to the highly fluid nature of the minimum quantity of CS-FLUX is required for each repair resulting in much cleaner interface. Even to CS-FLUX contains lead.
    The CS-FLUX is very sticky and designed to hold the balls of the component into the stencil during reballing process.

Soldering Tips Tinner lead free FELDER Flux (DIN EN 29454) 15g.
Display / Manometer 1 - 12 bar / 1-170 psi

Solder paste BGA rebalding (50gr)

UV optical liquid glue LOCA of adhesive can be used as a transparent optical materials, such as ITO film, PMMA, PC, PET, glass, electronic paper, projection screen, display, lens assembly, assembly assembly, capacitive touch screen, resistive touch screen panel, ICON, and other related electronic optical material of adhesive. These transparent isotropic without backing adhesive ensures accurate color and full display brightness, and to provide durable, high strength adhesive effect.

Loca glue for touch screen and lcd screen
Separator for broken touch panel
Loca glue to sticker lcd and touch panel

Note: the glue need uv light curing,and curing energy for 1.5j,and best power is 125w,and curing time is 9minutes.

Brookfield viscosity (25 C) : 2500 mPa, Refractive index (25) : 1.48 ,
Transmission (%) : >99, Haze : 1000, Store hardness : 10, Storage temp : 10~30 C- RH<70%

Desoldering metalic pump ZD-190 with tip teflon

Complete set Flux Paste Amtech RMA-229 (10ml)

Characteristics:
1. Can be used to completely remove the LOCA glue has cured;
2. Remove the adhesive quickly;
3. High recycling rates, low non-performing;
4. Volatile small, reusable;
5. Faster than other removers, only a few seconds to clear;
6. Simple and easy to use.

How to use:
Apply the liquid remover into the glue and let it act for 5 seconds.
After this period, gently using an appropriate blade to remove the hollow glue, glue scrape the device.
Wipe the remnants of glue with an anti-static cloth.

The CS-FLUX is a no-clean solder auxiliary highly liquid, lead-free specially designed for repairing BGA components (reballing and reflow) and other SMD components in laptop, gaming consoles etc.

Key features in CS-FLUX:

    The CS-FLUX when heated to approximately 150 degrees is converted into liquid and completely covers the micro gap between component BGA and PCB. In this manner all the "balls" of the component are covered with CS-FLUX and during reflow or removal of the fitting all the pad of the component and the PCB are not destroyed.
    The CS-FLUX is no clean flux but if necessary can be easily cleaned with alcohol. Causes no corrosion to the PCB and components.
    Thanks to the highly fluid nature of the minimum quantity of CS-FLUX is required for each repair resulting in much cleaner interface. Even to CS-FLUX contains lead.
    The CS-FLUX is very sticky and designed to hold the balls of the component into the stencil during reballing process.

The product is paste-like, the colour silver-grey.
Recommended soldering temperature: 217°C

Content: 50g, is enough for approx. 30.000 soldering points
Storage stability: approx. 5-6 months, recommended for storage in the refrigerator. (0-10°C).
For lab samples, small series, model-making, for a comfortable and professional processing of SMD-comonents with the help of hot air irons, hot plate, solder iron. Stored in a practical plastic case/syringe, garantees therefore a clean and pricise processing. The Solder Paste can be used directly from the cartridge, no mixing is required. Especially helpful by very dense placement.

Easy processing with regulated hot air soldering iron or electronic soldering iron - apply the dosed paste on the solder point, place the component, heat the solder point, and the SMD-solder surface is ready as well as the SMD-circuit. The solder paste can also be used for SMD-Rework applications as new contact layer, so that you can achieve high-quality soldering surfaces. The soldering paste (or: paste solder) is a supply material like wire solder, colophony and belongs to every solder surface.

1 Baku 128 Glue Adhesive Remover Bottle,
Content : 30ml

Powerful remover of Adhesive Glue of Screens Touch Frames Bezel Frames of cell phones Tablets etc etc
ideal for those who work in the repair of cell phones, laptops, video games, it is a powerful remover so as not to run the risk that when scraping it we inadvertently cut the communication lines of the component to be removed.
This is a very powerful remover, it only requires two or three drops, leave it for 5 to 10 minutes to act and it is more than enough to remove all the resin.
Poorly sealed bottle will run out quickly, avoid liquid volatile imbalance, affect results.
The liquid inside the bottle will have pressure, please open carefully

Description :

BGA IC Adhesive removing liquid softens and removes resinating and sealing glue of chip BGA IC of mobile phones.
The ingredients of it is environmental protection and safest. It has good permeability;
it can quickly soften and loosens solidified resin adhesive such as phenolics, epoxy, acrylate, polyurethane, organosilicon.
It does not to harm to circuit board and component, even to maintenance worker.
capacity:30ml

Attention: glue removing liquid , it shall not touch skin , eye , close it after using . if touched by accident ,pls use water clean it

Low viscosity, with visible light curing, curing ability strong shadow,
Light transmission rate of at 550nm: >99.5% (>99%), The viscosity of Brookfield RVT, 25 C, 20rpm, the spindle 3: 900-1200,The hardness of ASTM D2240E typ: 13-25,The curing conditions UVA250nm-420nm: 1500 Dielectric constant of 1MHz: 2.0-2.3, Solid refractive index Abbe at 25 C: 1.48, Haze, ASTM D1003: 0.35% (<0.5%),The yellow index of ASTM D1925/C2: 0.6 (<1.0)

Data type name

Description
Main composition of flux Rosin(CAS：65997-06-0),Succinic acid(CAS:：110-15-6),Triethylene glycol monobutyl ether(CAS：143-22-6),Antioxidant,Rust inhibitor.
Liveness Neutral
Viscosity 80 mPa.s
Colour Off-white translucent
Graininess 5—10μm
Poisonous Very low
PH value 8
Flash point 120℃
The main purpose Chip, solder ball, tin-lead or tin-silver-copper alloy surface soldering aid and rework process
Remark Very versatile halogen-free flux and has long been known.

Original AMTECH RMA-223-UV 100g SMT / SMD BGA Soldering Solder Flux Paste For PCB Rework Reballing Welding Repair Tools



Name: BGA Flux paste

Condition: Brand New From Factory

Quantity: 1 Bottle

Brand: AMTECH

Flux Type: RMA-223-UV

Lot#: F-228-10-10

Volume: 100g

The flux paste are specially formula for BGA reballing / balls works, they not only stick the balls much more well then regular flux, but also provide easy bonding with component pad to balls with typical oven profile.

This is no CLEAN needed!!
Brand: AMTECH(Made in USA)
Capacity: 100Gram
Condition: New
Payment: Paypal
ROHS , MSDS Certified!!!!
This paste is specially formula for BGA reballing / balls works, it stick the balls much more well then regular flux, and provide easy bonding with component pad to balls with typical oven profile.
features:
Flux Type:NC-559-ASM
Lot#:082-183
volume:100G
MADE IN USA

Description:
100% brand new
Brand: JAPAN KINGBO
Quantity:1pcs
Type: No Clean RMA-218
Weight: 100 grams of 1 bottle
The KINGBO RMA-218 is a high viscosity no-clean flux ,it can be used for PCB,BGA,PGA reworking,it can be used for soldering and reballing of computer and phone chips.
No clean,no smoke,no irritative gas.
It is original , Made in Japan
Package:1pc

Flux Gel is a solder flux Kalafonia designed for SMD component assembly and repair. It can be applied through a sieve, template or syringe.

- No washing required
- Preservation of gluing properties: 72 hours
- Good weldability on Ag, Cu, Au, Zn, Cd and SnPb surfaces

Volume: 100 cm3


Rarely, they may contain inaccuracies: the photo is for information only and may contain accessories not included in the standard packages, some specifications may be changed by the manufacturer without notice, or may contain operating errors

Solder Paste Mechanis 223 100g Highly Active Flux For Main Board Circuit Board Maintenance Flux PCB No-Clean Solder Oil RMA-223-UV RMA 223 BGA PCB Flux Paste No-Clean Solder / SMD Soldering Paste Flux Grease

Features:
100% Brand New and High quality
High-end Quality & A Unique Formula & Perfect Performance.
The residue is colorless and transparent, does not affect t he detection, disposable and excellent cleaning performance.
Superior Fluxing Ability to Improve Soldering Performance
Flux flows smoothly for consistently secure and uniform solder connections with no mess.
Special formulation designs deliver excellent rheology and high viscosity retention ability even after long open time.

Exceptional print definition
Capacity: 100g
Long stencil life
Wide process window
Excellent wetting compatibility on most board finishes
Low voiding
Compatible with enclosed printing heads
Clear residue