Nedis

Get your jewellery sparkling with this ultrasonic cleaner. The cleaner uses sonic sound waves that vibrate at 43kHz, ensuring all dust and dirt are carefully cleaned off - even in those hard to reach corners! Simply fill the tank with water and insert your items, for remarkable cleaning results. The digital timer lets you set the cleaning time from 1.5 to 8 minutes.

The ultrasonic cleaner can be used to clean jewellery, metal items, glasses, electric shaver heads, combs, cutlery, coins, printer heads, writing materials (e.g., pen nibs, ballpoint pen sleeves, etc) and hygiene items (e.g., toothbrushes, dentures, braces, etc). Note: The device cannot be used for cleaning wood, real pearls, leather goods and clock/watch mechanisms.


How to use:
1) Place your items into the cleaning basin.
2) Fill the cleaning basin with water. Do not exceed the MAX marking.
3) Close the lid. For cleaning larger objects, use the device with the lid open.
4) Plug in the mains to switch the device on.
5) Set the timer.
6) Press the on/off button.
7) When the timer reaches zero, the device stops cleaning automatically. Wait 5 minutes before you start another cleaning cycle.
8) Remove the mains plug to switch off the device.
9) Open the lid and remove the items.


Hints for use:
For enhanced cleaning, add a few drops of cleaning liquid to the water.
For jewellery cleaning, place your items into the removable basket.
For watch strap cleaning, strap the watch onto the watch holder with the watch facing upwards. Make sure that the watch mechanism is above the water level.
Note: Only watches with metal straps can be cleaned using this device.


Specifications:
Input voltage: 220 - 240V
Frequency: 50/60 Hz
Electrical power: 50W
Cleaning basin volume: 600 ml
Timer: 180 s / 280 s / 380 s / 480 s / 90 s
Dimensions (D x W x H): 125 x 200 x 130mm

Antenna set 5G / 4G / 3G / GSM with two 2.5m connection cables. Suitable for replacing the antenna of a 5G / 4G / 3G / GSM Modem / Router.

Antenna to enhance communication and increase data transfer speed via 5G / 4G / 3G and GSM signal, using quadruple frequency band. The antenna is equipped with two 2.5 meter cables, with negligible losses to ensure high quality signal reception. It can be placed indoors or outdoors for better signal reception.

Specifications:
- Allows receiving 5G signal with a single antenna
- Press: Mobile telephony
- Installation: Indoors + Exterior
- Frequency range: 698-5000 MHz
- Horizontal polarization: 360 °
- Vertical polarization: 60 °
- Gain: 6 dB
- Resistance: 50 Ohm
- Color: White
- Material: ABS
- Connection type: SMA-Male
- Cable length: 2.5 m
- IP X3 protection

Package Contents:
- 5G / 4G / 3G / GSM antenna
- Cable 2x 2.5 m
- Assembly materials
- Manual

Product description

Antenna GSM 2G/3G/4G to enhance data communication and increase the data transfer speed of the 4G/3G and GSM signal, using a double frequency band. The antenna is supplied with two 2.5-m LMR200 low-loss cables to enable a high-quality reception of the 4G signal with only 1 aerial. It can be mounted in or outdoors, whichever gives the best results.
Features

• Enables the reception of the 4G signal with a single antenna
• Incorporates protected ABS materials for a long lifespan
• Equipped with 2x 2.5-m LMR200 low-loss cable for a high-quality signal
• For indoor and outdoor use for perfect positioning
Package contents

Additional Information
Antenna
2x 2.5 m cable
Mounting materials
Quick start guide
Product specifications Appliance Indoor and Outdoor
Colour White
Material ABS
Connector type SMA-Male
Signal type 4G
3G
GSM
Gain 7 dB
IP rating IP65
Cable length 2.5 m
Frequency range 698 - 2700 MHz
Front-back ratio 20 dB
Horizontal polarisation -45 °
Impedance 50 Ohm
Vertical polarisation 45 °