Zhanlida

Glue E-8000 contact adhesive can be used on many materials, but Zhanlida recommends it as a base for cell phone frame repair (mainly for personal use), metal, glass, ceramic stone, bamboo wood, cloth, leather, its solid content, curing time and viscosity make it an excellent strong adhesive.

Characteristics:

Waterproof
No dust residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick release and easy to clean
Fast curing in 3-5 minutes (depending on material)
Specific:

Solid content: 35% – 47%
Color: Transparent
Size/Liquid Measurement: 3 ML
Cured hardness: 65-80 A
Concentration / Viscosity: 3200mpa.s
Temperature range: -35°c ~ +90°c
Curing time: 4-6 minutes (fast) 24-48 hours (full)

Craft Jewelry Tools.
Specifications:
Glue Color: Black
Appearance: transparent semi Floating Body
Solid Content: 33%-38%
Surface Drying Time: 3 minutes
Completely Cure Time: 24-48 hours
Save: at degrees to 28degrees of preservation


Attention:
1. Keep away from ignition sources when use.
2. Please put this item in well-ventilated environment.
3. Please keep it in the palace where children canʼt reach.
4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes

The reliable Zhanlida T-7000 glue is effectively used for gluing various parts. Its technical parameters have made it popular and often used in the field of electronics. This multipurpose compound can be used for gluing metal, glass, plastic and wooden materials, as well as electrical components and other items.

Review of Zhanlida T-7000 glue 15ml

Glue-sealant for gluing tachskrinov t7000 is widely used for the restoration of electronic gadgets.

This glue is offered in thick polyethylene tubes of different sizes and has such characteristics that make it almost universal.

The tube is equipped with a thin metal tip, which makes it possible to conveniently apply the composition to different surfaces, regulating its required quantity.

The T7000 is considered practical and convenient to use, as it becomes ductile when heated to a temperature of 80-100 ° C. Previously glued materials can be freed from soft glue, if necessary.

This feature allows the use of T-7000 glue to replace broken lids or glasses during the repair of many mobile phones.

Step-by-step instruction on the use of T-7000 glue

Adhesive is easy to use and is used according to the following scheme, which is suggested in the instructions to the composition:

Glued surfaces of a gadget or other object must be previously cleaned of dust and old glue.
After the surfaces are cleaned, they are degreased. It is necessary to allow the surfaces to dry out.
When the surfaces are completely dry, you can start applying the adhesive to the necessary layer. If you need to attach a touchscreen, then do not immediately connect it to the surface of the smartphone. You need to wait a few minutes for the glue to freeze. After the glue becomes more viscous, you need to connect the touch panel to the frame. Then it is necessary to press the surfaces together. This method avoids the flow of glue between the screen and the touchscreen to prevent the formation of streaks.
Bonded surfaces that have been joined together, should be pressed and left for a while (about a day) in this position until completely dry. Despite the fact that the final drying will occur in twenty-four hours, it is worth starting to use the glued product in forty-eight hours, so that the result is more reliable.
If in the process of gluing materials there are excess glues, then removing them will be very easy by rolling. It is enough to hold a non-sharp object or a finger in places where the composition has gone beyond the boundaries of the working surfaces, so that the glue begins to gather in lumps. From the slots it is easily removed with a needle

Stronger Waterproof T-9000 Glue 15ml Clear Super Adhesive Cell Phone Touch Screen.

Characteristics:
Colorless
Water proof
Strong adhesion
Fast & easy processing
Odor
Shock resistand

Technical specifications:
Solids content: 30% -35%
Hardness after curing: 65-80A
Drying time of the surface: 3-6 min.
Full curing time: 24 - 48 hours
Storage: Storage at 10 to 28 degrees
Net content: 15 ml

Special glue for touch display B7000 (15ml) without drying UV rays.
Multi purpose adhesives, Gravity magic rubber.
Waterproof, Flexible, Stimulate the taste free, Anti-Vibration, Paintable.

Brand available Zhanlida, Sunshine, Relife

Special glue for touch display B7000 (50ml) without drying UV rays.
Multi purpose adhesives, Gravity magic rubber.
Waterproof, Flexible, Stimulate the taste free, Anti-Vibration, Paintable.

Stronger New T-7000 Glue 50ml Zhanlida Black Super Adhesive Cell Phone Touch Screen Repair Frame Sealant Diy Craft Jewelry Tools.
Specifications:
Glue Color: Black
Appearance: transparent semi Floating Body
Solid Content: 33%-38%
Surface Drying Time: 3 minutes
Completely Cure Time: 24-48 hours
Save: at degrees to 28degrees of preservation
Weight: 60g

Attention:
1. Keep away from ignition sources when use.
2. Please put this item in well-ventilated environment.
3. Please keep it in the palace where children canʼt reach.
4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes

Zhanlida T Hard also called ZHANLIDA T and this contact adhesive can be used on many materials, it is upgraded from T7000+T9000S which combined the advantages of both and improved its durability, Zhanlida recommend it as the basic choice for repairing of mobile, tablet repair when you need a high performance adhesive such as T7000 and T9000S, its solids content, cure time and viscosity make it a great strong adhesive.

Great hard setting
Difficult setup
No powder residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick release and easy to clean
Fast curing in 3-6 minutes (depending on material)
Specific:

Solid content: 33% – 45%
Black colour
Size / Liquid Measurement: 50ML
Cured hardness: 68-85T
Concentration / Viscosity: 4500mpa.s
Temperature range: -35°c ~ +90°c
Curing time: 3-6 minutes (fast) 24 hours (full)

Zhanlida B-6000 Contact adhesive can be used on many materials but Zhanlida recommend it as the staple choice for cellphone repair, tablet repair, toys, diamond, decoration, flower, cloth, shell, jewelry, crafts , its solid content, curing time and viscosity make it a great strong adhesive.


Water resistant
No powder residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick and easy to clean overspill
Quick cures in 3-5 minutes (depending on material)

Specification:

Solid Content: 35% – 41%
Colour: Clear
Size / Liquid measurement: 9ML / 15ML / 25ML / 50ML / 110ML
Cured Hardness: 70-81B
Concentration / Viscosity: 5200mpa.s
Temperature range: -35°c ~ +90°c
Curing time: 4-6 Minutes (Quick) 24-48 Hours (Full)

Details:

This is how its applicator tip looks like

Special glue for touch display B7000 without drying UV rays.
Multi purpose adhesives, Gravity magic rubber.
Waterproof, Flexible, Stimulate the taste free, Anti-Vibration, Paintable.
Hardness 65-80A

Craft Jewelry Tools.
Specifications:
Glue Color: Black
Appearance: transparent semi Floating Body
Solid Content: 33%-38%
Surface Drying Time: 3 minutes
Completely Cure Time: 24-48 hours
Save: at degrees to 28degrees of preservation
Weight: 130g

Attention:
1. Keep away from ignition sources when use.
2. Please put this item in well-ventilated environment.
3. Please keep it in the palace where children canʼt reach.
4. Possible stimulation to skin and eye, please rinse off plenty of water if contacts with eyes

The reliable Zhanlida T-7000 glue is effectively used for gluing various parts. Its technical parameters have made it popular and often used in the field of electronics. This multipurpose compound can be used for gluing metal, glass, plastic and wooden materials, as well as electrical components and other items.

Review of Zhanlida T-7000 glue 110ml

Glue-sealant for gluing tachskrinov t7000 is widely used for the restoration of electronic gadgets.

This glue is offered in thick polyethylene tubes of different sizes and has such characteristics that make it almost universal.

The tube is equipped with a thin metal tip, which makes it possible to conveniently apply the composition to different surfaces, regulating its required quantity.

The T7000 is considered practical and convenient to use, as it becomes ductile when heated to a temperature of 80-100 ° C. Previously glued materials can be freed from soft glue, if necessary.

This feature allows the use of T-7000 glue to replace broken lids or glasses during the repair of many mobile phones.

Step-by-step instruction on the use of T-7000 glue

Adhesive is easy to use and is used according to the following scheme, which is suggested in the instructions to the composition:

Glued surfaces of a gadget or other object must be previously cleaned of dust and old glue.
After the surfaces are cleaned, they are degreased. It is necessary to allow the surfaces to dry out.
When the surfaces are completely dry, you can start applying the adhesive to the necessary layer. If you need to attach a touchscreen, then do not immediately connect it to the surface of the smartphone. You need to wait a few minutes for the glue to freeze. After the glue becomes more viscous, you need to connect the touch panel to the frame. Then it is necessary to press the surfaces together. This method avoids the flow of glue between the screen and the touchscreen to prevent the formation of streaks.
Bonded surfaces that have been joined together, should be pressed and left for a while (about a day) in this position until completely dry. Despite the fact that the final drying will occur in twenty-four hours, it is worth starting to use the glued product in forty-eight hours, so that the result is more reliable.
If in the process of gluing materials there are excess glues, then removing them will be very easy by rolling. It is enough to hold a non-sharp object or a finger in places where the composition has gone beyond the boundaries of the working surfaces, so that the glue begins to gather in lumps. From the slots it is easily removed with a needle

Stronger Waterproof T-9000 Glue 110ml Clear Super Adhesive Cell Phone Touch Screen.

Characteristics:
Colorless
Water proof
Strong adhesion
Fast & easy processing
Odor
Shock resistand

Technical specifications:
Solids content: 30% -35%
Hardness after curing: 65-80A
Drying time of the surface: 3-6 min.
Full curing time: 24 - 48 hours
Storage: Storage at 10 to 28 degrees
Net content: 15 ml

Description
Zhanlida recommendations:
E-7000 Contact adhesive can be used on many materials but Zhanlida recommend it as the staple choice for cloth goods, fibre products, diamond, acrylic, metal, glass, ceramic, its solid content, curing time and viscosity make it a great strong adhesive.
Features:
• Water resistant
• No powder residue
• Precision applicator with pin-in-lid design to prevent blockage.
• Quick and easy to clean overspill
• Quick cures in 3-5 minutes (depending on material)
Specification:
• Solid Content: 38% – 45%
• Colour: Clear
• Size / Liquid measurement: 110ML
• Cured Hardness: 75-83A
• Concentration / Viscosity: 5500mpa.s
• Temperature range: -35°c ~ +90°c
• Curing time: 3-5 Minutes (Quick) 24-48 Hours (Full)
Differences of different DIY adhesives:
We sell different DIY adhesives, what are the differences of them and how to choose right adheisve you need?
• B6000, good at cellphone frame repair (mainly for personal purpose), toys, diamond, decoration, flower, cloth, shell, jewelry, crafts
• B7000, good at cellphone frame repair (mainly for personal purpose), lass, plastic, leather, wood, cloth.
• E6000, good for wood and metal products, handicrafts, ornaments, sticky drills.
• E7000, good for cloth goods, fibre products, diamond, acrylic, metal, glass, ceramic.
• E8000, good at cellphone frame repair (mainly for personal purpose), metal, glass, ceramic stone, bamboo wood, cloth, leather.

Best selection of adhesives they have to offer - they are all stored here to strict specifications and stored in data batches to ensure you get a consistent, reliable bond every time.


We recommend T-8000 as a great repair adhesive, it will work well in situations that require something a little stronger such as brackets under stress or moving parts.

T8000

T-8000 Contact adhesive is the staple choice for mobile phone and tablet repair, its solid content, curing time and viscosity make it a great strong adhesive.

Water resistant
No powder residue
Precision applicator with pin-in-lid design to prevent blockage.
Quick and easy to clean overspill
Quick cures in 3-5 minutes (depending on material)

Specification:

Solid Content: 33% - 38%
Colour: Clear
Size / Liquid measurement: 110ML
Cured Hardness: 70-85A
Concentration / Viscosity: 4800mpa.s
Temperature range: -35°c ~ +90°c
Curing time: 3-5 Minutes (Quick) 24-48 Hours (Full)