PDS

● Microprocessor-controlled equipment.

● Direct PCB temperature measurement, improves accuracy and lessens damage or distortion.

● Five (5) temperature and time control points with automatic slope adjustment. Configurable to suit different solder paste and circuit boards.

● Two (2) default profiles suitable with most common solder paste specifications.

● Quick and easy resetting of control points for precise tuning of reflow profiles.

● Built-in safety feature of industry standard 0.01°C/s to 3°C/s rising slope.

● Fully digital panel controls and read-out of time and temperature for monitoring and ease of use.

● Highly compatible with lead-free applications.

The antistatic design of the HHL-3000 reliably prevents PCBs and circuits from being damaged due to static charging. The HHL-3000 is controlled by a microprocessor. The temperature of circuit board to be reflowed can be reduced by using the temperature sensor. The digital display enables an easy reading of tempertaure and time, making the handling of the device easier. The HHL-3000 reflow oven is also suitable for lead-free solder and applications.

The PMX 900/1800 Mobile Repeater kit is a high powered kit which boost signal strength and coverage for all GSM voice networks for any European services. The PMX 900/1800 is compatible with all GSM 900 and 1800MHz services and guaranteed to provide improved coverage for your mobile phone signal over an area up to 1000 sq m. The kit comes complete with everything you need to increase signal strength and strop dropped calls. This product is simple to install, comes with 100% free technical telephone support.

Dual Band GSM 900/1800
70 dB gain
Coverage up to 1000 sq m
supports up to 75 users
High gain signal antenna
Works with ALL GSM voice networks
Product Description

The PMX GSM 900/1800 is designed for medium to large sized coverage areas up to 1000 square meters. The PMX Mobile Repeater kit has been successfully and easily installed in all types of application areas including homes, basements, offices, warehouses and larger buildings. The installation process involves placement of the external signal or donor antenna which captures the signal and provides input to the repeater amplifier. This PMX 900/1800 system is compatible with all GSM mobile phone voice networks. The 70dB gain dual band amplifier increases the signal strength before re-broadcasting a clear and powerful signal inside. Boost bars, extend range and stop dropped calls today!

The PMX GSM 900/1800 Mobile Repeater kit comes complete with

PMX 70dB gain dual band GSM 900/1800MHzrepeater
High gain external dual band signal antenna
10 m coaxial cable for connecting signal antenna
AC/DC main power supply
Installation manual and accessories

710 is a modular and flexible infrared technology for reworking advanced IC packages like BGAs, micro-BGAs, QFPs, SOICs and other mounted component.
710 is a modular and flexible infrared technology for reworking advanced IC packages like BGAs, micro-BGAs, QFPs, SOICs and other mounted component. This focused infrared soldering system generates heat through concentration of infrared head waves for effective, high yield and flawless rework. Safe and effective, easy to operate infrared technology in a simplicity of a handtool.

The antistatic design of the Aoyue 720 reliably prevents PCBs and circuits from being damaged due to static charging. The ingenious Infrared (IR) soldering "Gun" is particularly suitable for the focused heatingof the components. The device has a large preheater with pc-board holder for heating uniformly the PC boards to be processed. The digital display enables an easy reading making the handling of the device easier. The IR gun is operated via foot switch, so that the hands are free to work.

Our PMX Tri-Band is the most unique repater kit on the market. This repeater kit is compatible with absolutely all GSM voice and all high speed 3G data networks. The Tri-Band Repeater Kit is compatible with all European mobile phone voice and data networks and effectively provides a strong and reliable signal in places with poor reception. The PMX Tri-Band Kit comes with everything you need to boost coverage in your area! This product is simple to install, comes with 100% free technical telephone support.

PMX TRI-Band GSM 900/1800 and 3G (2100mhz).
65dB gain
Coverage up to 1000 sq m
Simple Installation
Supports 75 simultaneous users
All GSM voice and all 3G networks
Product Description

The PMX Tri-Band kit is designed for universal mobile coverage on the go. The PMX Tri-Band enhances signal strength to your mobile phone or broadband 3G dongle by capturing the weak signal through an external aeiral antenna that provides input to a Tri-Band amplifier compatible with all GSM Voice and all data networks. This unit the lowes cost solution that provides coverage on all three of these bands simultaneously. This low cost solution will provide a reliable phone signal for areas up to 1000 square meters m2 depending on the antenna input signal.

Installation of the PMX Tri-Band repeater is simple and takes minutes. Just mount the external yagi aerial and connect to the repeater input port. At the output of the repeater connect the indoor coverage antenna then connect the power. For best performance the external aerial should be mounted in the location with the strongest signal strength. The effective coverage area of the unit depends on the input signal provided from this antenna. The PMX Tri-Band repeater kit comes complete with:

Tri-Band Repeater Amplifier
External Tri-Band High Gain MR Yagi aerial
Indoor high gain tri-band panel antenna
10 m coax to connect to repeater
AC/DC power supply
Easy to follow installation manual

Main features:
Large area of infrared carbon fiber Pre-heating system, with the advantage of pre-heating fast and evenly and no light pollution.
Temperature parameters protected by limits of authority, for avoiding error settings.
Ten segments of temperature control process, suitable for all kinds of BGA Rework.
Unlimited storage of the temperature profile, just need press one key to use the profile.
Three K-type sensors available can realize the high precise temperature testing of each point of PCB or BGA, and PC can generate report of curves analysis automatically.
Desoldering and soldering automatically, No need the manual adjustment.
Hot air flow can be adjustable to meet the demand of any chips.
USB Connection driver-free, PC control.
The bottom hot air lifting control available in the front panel, to adjust at any time.

Main technical parameter
Power supply AC 220V±10 50/60 Hz
Top hot air heater power 800 W
Bottom hot air heater power 800 W
IR preheating power 2400 W
Hot air heating temp 400℃(Max)
Bottom preheating size 400mm×300mm
Max available PCB size 400mm×380mm
Available chip size 2×2mm--60×60mm
Dimensions L520×W520×H550
Communication port USB
External temperature port 3pcs
Net weight 25kg
Color Milk White
CE idendificated,ensure the product value and 1 year warranty,(offer free parts within 1 year).

Automatic BGA Rework Machine ZM-R6810 for chip repair
1, Automatic Model
2, Optical Alignment Vision System
3, PLC Control，Panasonic serve system
4, Smoke Absorbing System
5, Mesh Protection on the IR heaters

Micro BGA component assemblies in mobile phones, computers, telephones etc.



- The antistatic design prevents PCBs and the placement of components from being damaged due to static charging.
- Elaborate infrared (IR) soldering "GUN" for focused heating of the components
- Large, built-in PCB preheater with mid-wavelength infrared (IR)
- Massive PCB workpiece holder
- Digital display for simple settings
- Ergonomic shape allows an easy and comfortable working
- It is delivered with handheld soldering iron (lead-free)
- A micro processor controls time, temperature and airflow for maximum performance
- The placement of the components is dipayed via screen



This station is microprocessor controlled. The Aoyue 9000A is an ingenuous and sophisticated rework system. Micro BGA assemblies from mobile phones, computers, telephones and game consoles can be processed safely and effectively by using this performant station. Handling and operation are simple to come to grips with. This station enables the user high-performance rework applications on modern systems like: BGAs, BGAs SMDs, SMT connectors without overheating these components. The station uses heat wave technology (IR) instead of the conventional hot air. the palcement of the components is achieved without using protective shield or other tools because no air flow is used for soldering. By non-contact measurement the soldering and desoldering temperature is determined (at the IR-light source and the quartz preheater), simple, fast and safe. After being sucessfully soldered out BGAs can be soldered again in place. No expensive nozzles are needed, the unit is complete and fully operational. Due to the adjustable PC-board surface preheater the user can avoid misplacing the components or their distortion. Using this rework system is as simple as placing components on an empty pc board. The built-in vacuum placer facilitates the removal of the components to be desoldered.